Create adaptors for bayonet points on 3M elastomeric mask

Question

Create adaptors for bayonet points on 3M elastomeric mask

Closed this issue 2 years ago · 2 comments

According to NIOSH, we can have a passive N95 respirator with extra bells and whistles so long as the device functions as a passive N95 respirator throughout.

So! Design left and right adaptors on a bayonet for a 3M respirator (ideally 6k or 7k series) that will connect to the 22mm hoses from the Papra, as well as a 22mm splitter to split the 22mm from the papra to go to either side of the face.

The adaptors will need 1-way valves to prevent exhalation from going into the tubes and filters.

Answer 1 · 2022-01-17T17:37:33.000Z

only resin printable, will make a new folder in STLs/respirator/(3M Adaptors)

Answer 2 · 2022-06-09T16:38:34.000Z

Now have these parts, need to make a PR