tetrabiodistributed/papr-print-files
This repository contains all of the files necessary to print components of the Tetra PAPR.
NOASSERTION
Issues
- 1
- 1
have the right crimper for the BNC
#161 opened - 1
- 1
- 7
Investigate new BNC cables
#158 opened - 1
Coordinate 29 Aug Build Party with Helpful
#157 opened - 2
- 2
Investigate clipping solutions
#155 opened - 3
SPIKE: explore AAF filter material
#153 opened - 1
- 3
- 5
- 3
- 1
Design straight funnel for the reducer
#146 opened - 1
investigate the use of a preswirl
#144 opened - 1
- 1
investigate a slightly more powerful fan
#141 opened - 2
- 1
Investigate the fan power draw
#139 opened - 1
investigate flow amount without the filter
#138 opened - 1
- 0
Need a medium-sized mask
#135 opened - 1
- 1
Mask Assembly Diagram
#133 opened - 0
Battery Housing Assembly Diagam
#132 opened - 4
Fan Box Assembly Diagram
#131 opened - 1
More extensive pressure testing
#130 opened - 0
- 1
Mark printed old files
#128 opened - 7
Define acceptable part parameters
#127 opened - 1
- 2
generate PQ curves
#125 opened - 1
- 1
Add weather cover
#123 opened - 1
- 1
- 1
light shining between m12 controller parts
#120 opened - 2
wall of fan box can move
#119 opened - 1
- 1
- 2
- 1
- 2
Need to get BOM components
#111 opened - 1
need dxf for P-TET-000117-1
#108 opened - 1
Write instructions for March Build
#107 opened - 0
- 3
add louvers to the filter cover
#105 opened - 0
Change nuts to locking nuts on the fan box
#104 opened - 0
Modify the M12 print with a BNC connector
#103 opened - 0
Build a fan box version with a BNC connector
#102 opened