status: currently stable, writing documentation
drmon
monitor and failsafe automation for your draconic reactor
what is this
this is a computercraft LUA script that monitors everything about a draconic reactor, with a couple features to help keep it from exploding
features
-
uses a 3x3 advanced computer monitor to display all the stats of your reactor
-
regulates the input gate for the targeted field strength of 50%
- adjustable
-
immediate shutdown and charge upon your field strength going below 20%
- adjustable
- reactor will activate upon a successful charge
-
immediate shutdown when your temperature goes above 8000C
- adjustable
- reactor will activate upon temperature cooling down to 3000C
- adjustable
-
easily tweak your output flux gate via touchscreen
- +/-100k, 10k, and 1k increments
requirements
- one fully setup draconic reactor with fuel
- 1 advanced computer
- 9 advanced monitors
- 3 wired modems, wireless will not work
- a bunch of network cable
installation
- your reactor output flux gate must be setup so that one side of it and one of your stabilizers touches a side of the advanced computer
- by default, flux gate should touch the right side, stabilizer should touch the back of the computer
- if you want to use different sides you need to modify
startup
after you have installed this and specify the sides
- if you want to use different sides you need to modify
- connect a modem to your input flux gate (the one connected to your reactor energy injector)
- connect a modem to your advanced computer
- setup yoru monitors to be a 3x3 and connect a modem to anywhere but the front
- run network cable to all 3 modems
- install this code via running the install script using these commands :
> pastebin get Ls1Wg3QQ install
> install
- modify
startup
if you wish to configure/alter any variables mentioned in the feature list, you'll find them at the top of the file
> startup
- you should see stats in your term, and on your monitor
upgrading to the latest version
- right click your computer
- hold ctrl+t until you get a
>
> install
> startup