Projeto de RSSF LAB I que implementa uma comunicação entre servidor e cliente de interface gráfica (interação de usuário) com um cliente microcontrolador.
The following table describes the protocol used for both clients
| PROTOCOLO | VALOR | DESCRIÇÃO |
|---|---|---|
| IDENTIFY | 1 | Microcontroller Client |
| 2 | UI Client | |
| SUCCESS | 1 | Send a Success |
| LED GET STATE | 0/1 | Get the state value of microcontroller client. The value is not relevant |
| LED STATE | 1 | Led red is on |
| 2 | Led green is on | |
| 3 | Both led are on | |
| 0 | Both led are off | |
| LED SET STATE | 1 | Set red led on |
| 2 | Set green led on | |
| 3 | Set both leds ON | |
| 0 | Set both leds OFF |
The following protocol is used only by UI Client
| PROTOCOLO | VALOR | RETORNO | DESCRIÇÃO |
|---|---|---|---|
| DEVICES LIST | 1 | List of Microcontrollers | Get the list of microcontrollers connected to the server |