pxbee-trigger

Programmable XBee Trigger that is ZigBee Home Automation profile compliant. The testing of this feature is carried out using SmartThings Hub and a default ZigBee device handler.

Bill of Materials

Component	Manufacturer	Quantity	SKU / Part nr.	Mandatory / Optional
Programmable XBee	Digi	1	XBP24CZ7PITB003	M
Grove - XBee Carrier	Seeed Development	1	113020004	O
Grove - Relay	Seeed Development	1	103020005	O
Grove 5cm Cable	Seeed Development	1	110990036	O

Compiling

On 32bit Linux target, simply: make
On 64bit Linux target:
- Intall 32bit compatible libraries: sudo apt-get install lib32stdc++6
- make
On MacOS:
- Install Docker
- make builddocker
- make dall

Firmware

Output file: obj/trigger.abs.bin
Upload the file via local XMODEM or use Over-the-air upgrade if the current firmware supports it (you can use pxbee-fwup.js)
See further Programmable XBee documentation

Trigger

Send a Unicast ZCL "On" command to trigger the connected relay for 125ms. The state of the switch remains in "Off" state. Broadcast command is ignored by default.

Endpoint: 0xEA,
clusterId: 0x0006,
profileId: 0x0104,
command: 0x01

Settings

The following defines can be altered in custom.h prior to compilation to change the behavior how the Trigger works:

Name	Description	Default
`PXBEE_TRIGGER_IGNORE_BROADCAST`	When enabled, ignores broadcast commands and reacts only when unicast messages are sent to the specific address (ignores All On/All Off commands).	Enabled
`ZCL_MANUFACTURER`	The reported manufacturer string. For SmartThings local execution support without custom device handler, set this to "Leviton".	"PXBee"
`ZCL_MODEL`	The reported model string. For SmartThings local execution support without custom device handler, set this to "ZSS-10".	"Trigger"

License

This project is based on exsilium/pxbee-blink-led boilerplate and includes the full Digi XBee SDK version 1.6.0 sources.

Includes the necessary build binaries:

HI-CROSS+ ANSI-C Compiler for HC08 V-5.0.39, Dec 13 2011
HI-CROSS+ SmartLinker V-5.0.48, Dec 13 2011
HI-CROSS+ Burner V-5.0.16, Dec 13 2011
(c) Copyright Freescale 1987-2010

If not otherwise noted, the added code is BSD licensed.