Small set of tools convert packets from captures (h = hash, c = capture, convert and calculate candidates, x = different hashtypes) for the use with latest hashcat or John the Ripper. The tools are 100% compatible to hashcat and John the Ripper and recommended by hashcat. This branch is pretty closely synced to hashcat git branch (that means: latest hcxtools matching on latest hashcat beta) and John the Ripper git branch ("bleeding-jumbo").
Support for hashcat hash-modes: 2500, 2501, 4800, 5500, 12000, 16100, 16800, 16801
Support for John the Ripper hash-modes: WPAPSK-PMK, PBKDF2-HMAC-SHA1, chap, netntlm, tacacs-plus
After capturing, upload the "uncleaned" cap here (https://wpa-sec.stanev.org/?submit) to see if your ap or the client is vulnerable by using common wordlists. Convert the cap to hccapx and/or to WPA-PMKID-PBKDF2 hashline (16800) and check if wlan-key or plainmasterkey was transmitted unencrypted.
Multiple stand-alone binaries - designed to run on Arch Linux.
All of these utils are designed to execute only one specific function.
hcxdumptool moved to: https://github.com/ZerBea/hcxdumptool
Read this post: hcxtools - solution for capturing wlan traffic and conversion to hashcat formats (https://hashcat.net/forum/thread-6661.html)
| Tool | Description |
|---|---|
| hcxpcaptool | Shows info of pcap/pcapng file and convert it to other hashformats accepted by hashcat and John the Ripper |
| hcxpsktool | Calculates candidates for hashcat and john based on based on hcxpcaptool output (-o, -z- -U) or commandline input |
| hcxwltool | Calculates candidates for hashcat and john based on hcxpcaptool output (-E, -I- -U) |
| hcxhash2cap | Converts hash file (PMKID, EAPOL-hccapx, EAPOL-hccap, WPAPSK-john) to cap |
| hcxhashcattool | Calculate PMKs from hashcat -m 2500 potfile |
| wlanhc2hcx | Converts hccap to hccapx |
| wlanwkp2hcx | Converts wpk (ELMCOMSOFT EWSA projectfile) to hccapx |
| wlanhcx2essid | Merges hccapx containing the same ESSID |
| wlanhcx2ssid | Strips BSSID, ESSID, OUI |
| wlanhcxinfo | Shows detailed info from contents of hccapxfile |
| wlanhcxmnc | Help to calculate hashcat's nonce-error-corrections value on byte number xx of an anonce |
| wlanhashhcx | Generate hashlist from hccapx hashfile (md5_64 hash:mac_ap:mac_sta:essid) |
| wlanhcxcat | Simple password recovery tool for WPA/WPA2/WPA2 SHA256 AES-128-CMAC (hash-modes 2500, 2501) |
| wlanpmk2hcx | Converts plainmasterkey and ESSID for use with hashcat hash-mode 12000 or john PBKDF2-HMAC-SHA1 |
| wlanjohn2hcx | Converts john wpapsk hashfiles for use with hashcat hash-modes 2500, 2501 |
| wlancow2hcxpmk | Converts pre-computed cowpatty hashfiles for use with hashcat hash-mode 2501 |
| wlanhcx2john | Converts hccapx to format expected by John the Ripper |
| wlancap2wpasec | Upload multiple caps to https://wpa-sec.stanev.org |
| whoismac | Show vendor information and/or download oui reference list |
Simply run:
make
make install (as super user)
-
Linux (recommended Arch Linux, but other distros should work, too (no support for other distributions).
-
libopenssl and openssl-dev installed
-
librt and librt-dev installed (should be installed by default)
-
zlib and zlib-dev installed (for gzip compressed cap/pcap/pcapng files)
-
libcurl and curl-dev installed (used by whoismac and wlancap2wpasec)
-
libpthread and pthread-dev installed (used by hcxhashcattool)
To install requirements on Kali use the following 'apt-get install libcurl4-openssl-dev libssl-dev zlib1g-dev'
| Script | Description |
|---|---|
| piwritecard | Example script to restore SD-Card |
| piwreadcard | Example script to backup SD-Card |
Most output files will be appended to existing files (with the exception of .cap files).
0: MP info (https://hashcat.net/wiki/doku.php?id=hccapx#message_pair_table)
1: MP info (https://hashcat.net/wiki/doku.php?id=hccapx#message_pair_table)
2: MP info (https://hashcat.net/wiki/doku.php?id=hccapx#message_pair_table)
3: x unused
4: ap-less attack (set to 1) - no nonce-error-corrections neccessary
5: LE router detected (set to 1) - nonce-error-corrections only for LE neccessary
6: BE router detected (set to 1) - nonce-error-corrections only for BE neccessary
7: not replaycount checked (set to 1) - replaycount not checked, nonce-error-corrections definitely neccessary