inlets

Expose your local endpoints to the Internet

Intro

inlets combines a reverse proxy and websocket tunnels to expose your internal and development endpoints to the public Internet via an exit-node. An exit-node may be a 5-10 USD VPS or any other computer with an IPv4 IP address.

Why do we need this project? Similar tools such as ngrok or Argo from CloudFlare are expensive and closed-source. Ngrok is also often banned by corporate firewall policy. Other open-source tunnel tools are designed to only set up a static tunnel. inlets aims to dynamically bind and discover your local services to DNS entries with automated TLS certificates to a public IP address over its websocket tunnel.

When combined with SSL - inlets can be used with any corporate HTTP proxy which supports CONNECT.

Initial goals:

automatically create endpoints on exit-node based upon client definitions
- multiplex sites on same port through use of DNS / host entries
link encryption using SSL over websockets (wss://)
automatic reconnect
authentication using service account or basic auth
automatic TLS provisioning for endpoints using cert-magic
- configure staging or production LetsEncrypt issuer using HTTP01 challenge

Stretch goals:

discover and configure endpoints for Ingress definitions from Kubernetes
configuration to run "exit-node" as serverless container with Azure ACI / AWS Fargate
automatic configuration of DNS / A records
configure staging or production LetsEncrypt issuer using DNS01 challenge

Non-goals:

tunnelling plain (non-HTTP) traffic over TCP

Status

Unlike HTTP 1.1 which follows a synchronous request/response model websockets use an asynchronous pub/sub model for sending and receiving messages. This presents a challenge for tunneling a synchronous protocol over an asynchronous bus. This is a working prototype that can be used for testing, development and to generate discussion, but is not production-ready.

There is currently no authentication on the server component
The default configuration uses websockets without SSL ws://, but to enable encryption you could enable SSL wss://
There is no timeout for when the tunnel is disconnected
The upstream URL has to be configured on both server and client until a discovery or service advertisement mechanism is added

Contributions are welcome. All commits must be signed-off with git commit -s to accept the Developer Certificate of Origin.

Binaries for Linux, Darwin (MacOS) and armhf are made available via the releases page

Test it out

You will need Golang 1.10 or 1.11 on both the exit-node or server and the client.

On the server or exit-node

Start the tunnel server on a machine with a publicly-accessible IPv4 IP address such as a VPS.

go get -u github.com/alexellis/inlets
cd $GOPATH/src/github.com/alexellis/inlets

go run -server=true -port=80 -upstream=http://127.0.0.1:3000

Note down your public IPv4 IP address i.e. 192.168.0.101

On your dev machine start an example service

This service generates hashes and is an example we want to share online

go get -u github.com/alexellis/hash-browns
cd $GOPATH/src/github.com/alexellis/hash-browns

port=3000 go run server.go

On your dev machine

Start the tunnel client

go get -u github.com/alexellis/inlets
cd $GOPATH/src/github.com/alexellis/inlets

go run -server=false -remote=192.168.0.101:80 -upstream=http://127.0.0.1:3000

Finally with an example server running and a tunnel server and a tunnel client send a request to the public IP address i.e.:

curl -d "hash this" http://192.168.0.101/hash

You will see the traffic pass between the exit node / server and your development machine. You'll see the hash message appear in the logs as below:

~/go/src/github.com/alexellis/hash-browns$ port=3000 go run server.go 
2018/12/23 20:15:00 Listening on port: 3000
"hash this"

Now check the metrics:

curl http://192.168.0.101/metrics | grep hash

Try something else

You can expose an OpenFaaS or OpenFaaS Cloud deployment with inlets - just change -upstream=http://127.0.0.1:3000 to -upstream=http://127.0.0.1:8080 or -upstream=http://127.0.0.1:31112. You can even point at an IP address inside or outside your network for instance: -upstream=http://192.168.0.101:8080.

You can build a basic supervisor script for inlets in case of a crash, it will re-connect within 5 seconds:

In this example the Host/Client is acting as a relay for OpenFaaS running on port 8080 on the IP 192.168.0.28 within the internal network.

Host/Client:

while [ true ] ; do sleep 5 && ./inlets -server=false -upstream=http://192.168.0.28:8080 -remote=exit.my.club  ; done

Exit-node:

while [ true ] ; do sleep 5 && ./inlets -server=true -upstream=http://192.168.0.28:8080 ; done

Run as a deployment on Kubernetes

You can even run inlets within your Kubernetes in Docker (kind) cluster to get ingress (incoming network) for your services such as the OpenFaaS gateway:

apiVersion: apps/v1beta1 # for versions before 1.6.0 use extensions/v1beta1
kind: Deployment
metadata:
  name: inlets
spec:
  replicas: 1
  template:
    metadata:
      labels:
        app: inlets
    spec:
      containers:
      - name: inlets
        image: alexellis2/inlets-runtime:0.2.1
        imagePullPolicy: Always
        command: ["./inlets"]
        args:
        - "-server=false"
        - "-upstream=http://gateway.openfaas:8080"
        - "-remote=your-public-ip"

Replace the line: - "-remote=your-public-ip" with the public IP belonging to your VPS.

What is the cheapest viable VPS?

The cheapest option is probably Scaleway at 1.99 EUR / month using the "1-XS" from the "Start" tier.

the-cc-dev/inlets

inlets

Intro

Status

Test it out