/SimpleDSP

A basic (soft) dsp library for arduino and most of the microcontrollers which can be programmed in C/C++

Primary LanguageCMIT LicenseMIT

SimpleDSP

SimpleDSP is a basic DSP library which is for arduino and most of the microcontrollers which can be programmed in C/C++

Performance:

Here is some examples for its performance. Actually it is not optimized for performance. Its main focuses are portability and education.

Arduino Nano

  • FFT 16 points: 2 ms
  • FFT 32 points: 6 ms
  • FFT 64 points: 16 ms
  • fir filter 10 coeficients: 190 us
  • fir filter 23 coeficients: 453 us
  • fir filter 46 coeficients: 900 us

10 coeficients FIR filter can be run at 5khz max frequency on an Arduino Nano.

Arduino Due

  • FFT 64 points: 2 ms
  • FFT 128 points: 6 ms
  • FFT 256 points: 10 ms

Fast Fourier Transform (FFT) and Inverse Fast Fourier Transform (IFFT)

detailed info

Arduino Example

FFT and IFFT functions require 2 arguments. data data lenght Do not forget to add #include "simpleDSP_FFT.h"

Full example for FFT and IFFT please refer here

FFT spectrum example

  FFT(data,DATA_LEN);
  IFFT(data,DATA_LEN);
  calcTime = millis()-startTime;
  Serial.print("Total calculation time: ");
  Serial.println(calcTime);

FIR Filter

Theory

detailed info

Arduino Example

FIR is filter structure which keep delays and coeficients of filter. There are 2 public functions. firInit initiliazes the structure according to parameters and makes required memory allocations. Coeficients and its lenght are given as parameter to this function Do not forget to add #include "simpleDSP_fir.h"

void firInit(FIR *fir, int coefBLen, float *coefsB);
float firFilt(FIR *fir, int input);

FIR Full example

    Serial.begin(9600);
    firInit(&fir1, 46, coef);
    Serial.println("FIR filter initiliaze finished");
    float a;
    startTime = micros();
    for (int i = 0; i < 255; i++)
    {
        a = firFilt(&fir1, input[i]);
    }
    calcTime = micros() - startTime;
    Serial.print("Total calculation time: ");
    Serial.println(calcTime);

IIR Filter

Theory

detailed info

Arduino Example

IIR is filter structure which keep delays and coeficient of filter. There are 2 functions to implement IIR filter using SimpleDSP library. initIIR function is the constructor function for the filter. Filter coeficients for a and b should be given as arguments to this function. After init, filtIIR must be used as filtering function. This function requires 2 arguments. Object instance and data. It returns the filtered output.

void iirInit(IIR *iir, int coefBLen, float *coefsB, int coefALen, float *coefsA);
float iirFilt(IIR *iir, int input);

Do not forget to add #include "simpleDSP_iir.h" to your code.

IIR Full example

    Serial.begin(9600);
    iirInit(&iir1, 4, coefB, 4, coefA);
    Serial.println("IIR filter initiliaze finished");
    float a;
    startTime = micros();
    for (int i = 0; i < 255; i++)
    {
        a = iirFilt(&iir1, input[i]);
    }
    calcTime = micros() - startTime;
    Serial.print("Total calculation time: ");
    Serial.println(calcTime);

Octave Test Code

This code create sample data and plot the signal and its FFT. The octave code only needed for testing of function. Create sample signal which is at 10 kHz sample rate and it is the combination of 3.2 kHz and 800 Hz sine waves.

N=255;
f1=800;
f2=3200;
fo=10000;
for i=1:1:N
x(i)=1000*cos(2*pi*f1*i/fo)+1000*cos(2*pi*f2*i/fo);
printf("%d\n",x(i));
end

Calculate and plot x and FFT of x. For fft x axis values are calculated using kor=(1:N)*fo/N;

plot(x);
X=abs(FFT(x));
figure;
kor=(1:N)*fo/N;
plot(kor,X);

Output from octave

Graph of Raw Signal

inputa

Graph of FFT Signal

inputf

you can use octave from here

Filter Design Using Octave

output of fir functions can be used as filter coeficients

Resource for FIR

Examples:

 freqz (fir1 (40, 0.3));
 freqz (fir1 (15, [0.2, 0.5], "stop"));  # note the zero-crossing at 0.1
 freqz (fir1 (15, [0.2, 0.5], "stop", "noscale"));
figure
b= fir1 (20, 0.3, "low");
y = filter(b,1,x);
plot(y)

filter frequency response

function reference fir1

Resource for IIR

figure
[b, a] = butter(3, 0.3, "low");
y = filter(b,a,x);
plot(y)
octave:> b
b =

    0.049533      0.1486      0.1486    0.049533
octave:> a
a =

   1.00000  -1.16192   0.69594  -0.13776

Outputs after filtering

Time Domain Signal

output

FFT of Output Signal

outputf