tedge-standalone

This repository shows how thin-edge.io can be packaged and installed on a device which has the following constraints:

device has less than 5 MB disk space on the read-write partition
device uses a read-only root filesystem (rootfs) which results in the following restrictions:
- Can't add or modify services in the init system -> need custom init system
- Can't add linux users or groups -> need to run services as root
- Can't install any dependencies in the system files -> need static MQTT broker installed at a custom location
- Can't install files in the default locations (e.g. /etc/tedge) -> need to install all components under a custom path (which is read-writable)

Pre-requisites

The following pre-requisites are required for the standalone thin-edge.io version to work.

busy-box (with the following binaries)
- wget
- runsvdir

Install

The following command can be used to install the standalone/portable thin-edge.io version.

Using wget

wget -q -O - https://raw.githubusercontent.com/thin-edge/tedge-standalone/main/install.sh | sh -s

Using curl

curl -fsSL https://raw.githubusercontent.com/thin-edge/tedge-standalone/main/install.sh | sh -s

Bootstrapping

Run the bootstrap.sh script to run the bootstrap process to create a certificate and connect thin-edge.io.

/data/tedge/bootstrap.sh

Alternatively, you can do the bootstrapping yourself but running the following commands:

. /data/tedge/env
tedge-cli cert create --device-id "mydeviceid"
tedge-cli config set c8y.url "<myurl>"
tedge-cli cert upload c8y --user "<myuser>"

Where tedge-cli is a custom wrapper around tedge which sets the custom configuration directory for you from the CONFIG_DIR environment variable, via --config-dir "$CONFIG_DIR". The tedge-cli wrapper can be removed once the following ticket this ticket is implemented, thin-edge/thin-edge.io#1794.

ca-certificates

The standalone installation includes an existing ca-certificates.crt file which is installed under /data/tedge/ca-certificates.crt. Depending on which Cumulocity IoT instance, and external services you wish to use with thin-edge.io, you may need to add addition CA certificates to the file.

Automatically starting services

Note: For Telit devices, checkout these instructions.

Assuming you have already bootstrapped the device (e.g. configured the Cumulocity IoT instance, and uploaded the device certificate), then you need to add the following lines to your startup routine:

. /data/tedge/env
mkdir -p "$SVDIR"
tedgectl enable mosquitto
tedgectl enable tedge-agent
tedgectl enable tedge-mapper-c8y
runsvdir -P "$SVDIR/" &

sleep 5
MESSAGE=$(printf '{"text": "tedge started up 🚀 version=%s"}' "$(tedge-cli --version | cut -d' ' -f2)")
tedge-cli mqtt pub --qos 1 "te/device/main///e/startup" "$MESSAGE"

Then reboot device to check if the services are started correctly.

Note The above snippet uses runit to launch the thin-edge.io services from a custom configured services directory (as defined in the /data/tedge/env dotenv file). runit is used as it is included in busy-box and provides service supervision (e.g. it will automatically relaunch the service if it crashes for any reason).

Service management

Assuming you have already launched the custom runsvdir instance, the following commands can be used to manage the thin-edge.io related services. The commands use a wrapper (tedgectl) around the runit commands for convenience (and tedgectl is used in the init system integration defined in the system.toml file).

Start services

. /data/tedge/env
tedgectl start tedge-agent
tedgectl start tedge-mapper-c8y
tedgectl start mosquitto

Stop services

. /data/tedge/env
tedgectl stop tedge-agent
tedgectl stop tedge-mapper-c8y
tedgectl stop mosquitto

Enable services

Enable services so they automatically run on startup.

. /data/tedge/env
tedgectl enable mosquitto
tedgectl enable tedge-agent
tedgectl enable tedge-mapper-c8y

Disable services

Disable services so they don't automatically run on startup.

. /data/tedge/env
tedgectl disable mosquitto
tedgectl disable tedge-agent
tedgectl disable tedge-mapper-c8y

Upgrading

https://cloudsmith.io/~thinedge/repos/tedge-main/packages/?q=format%3Araw

For example, the tedge-armv7 package.

c8y software get --id tedge || c8y software create --name tedge --data softwareType=executable

# Sele
c8y software versions create --software tedge --version "1.1.2-rc135+gf35f1f1" --url "https://dl.cloudsmith.io/public/thinedge/tedge-main/raw/names/tedge-armv7/versions/1.1.2-rc135+gf35f1f1/tedge.tar.gz"