/liboqs

C library for quantum-safe cryptography.

Primary LanguageCOtherNOASSERTION

AppVeyor: Build status image, CircleCI: Build status image, TravisCI: Build Status

liboqs

liboqs is an open source C library for quantum-safe cryptographic algorithms.

Overview

liboqs provides:

  • a collection of open source implementations of quantum-safe key encapsulation mechanism (KEM) and digital signature algorithms; the full list can be found below
  • a common API for these algorithms
  • a test harness and benchmarking routines

liboqs is part of the Open Quantum Safe (OQS) project led by Douglas Stebila and Michele Mosca, which aims to develop and integrate into applications quantum-safe cryptography to facilitate deployment and testing in real world contexts. In particular, OQS provides prototype integrations of liboqs into TLS and SSH, through OpenSSL and OpenSSH.

More information on OQS can be found here and in the associated whitepapers.

Status

Supported Algorithms

Details on each supported algorithm can be found in the docs/algorithms folder.

The list below indicates all algorithms supported by liboqs, but not all those algorithms have been selected for standardization by NIST, specifically Kyber (excluding the "-90s" variants), Dilithium (excluding the "-AES" variants), Falcon, and SPHINCS+ (excluding the "robust" variants). Activating only those standardized algorithms for use in liboqs can be facilitated by setting the OQS_ALGS_ENABLED build configuration variable to STD. By default liboqs is built supporting all, incl. experimental, PQ algorithms listed below.

Key encapsulation mechanisms

  • BIKE: BIKE-L1, BIKE-L3
  • Classic McEliece: Classic-McEliece-348864†, Classic-McEliece-348864f†, Classic-McEliece-460896†, Classic-McEliece-460896f†, Classic-McEliece-6688128†, Classic-McEliece-6688128f†, Classic-McEliece-6960119†, Classic-McEliece-6960119f†, Classic-McEliece-8192128†, Classic-McEliece-8192128f†
  • FrodoKEM: FrodoKEM-640-AES, FrodoKEM-640-SHAKE, FrodoKEM-976-AES, FrodoKEM-976-SHAKE, FrodoKEM-1344-AES, FrodoKEM-1344-SHAKE
  • HQC: HQC-128, HQC-192, HQC-256†
  • Kyber: Kyber512, Kyber512-90s, Kyber768, Kyber768-90s, Kyber1024, Kyber1024-90s
  • NTRU-Prime: sntrup761

Signature schemes

  • CRYSTALS-Dilithium: Dilithium2, Dilithium3, Dilithium5, Dilithium2-AES, Dilithium3-AES, Dilithium5-AES
  • Falcon: Falcon-512, Falcon-1024
  • SPHINCS+-Haraka: SPHINCS+-Haraka-128f-robust, SPHINCS+-Haraka-128f-simple, SPHINCS+-Haraka-128s-robust, SPHINCS+-Haraka-128s-simple, SPHINCS+-Haraka-192f-robust, SPHINCS+-Haraka-192f-simple, SPHINCS+-Haraka-192s-robust, SPHINCS+-Haraka-192s-simple, SPHINCS+-Haraka-256f-robust, SPHINCS+-Haraka-256f-simple, SPHINCS+-Haraka-256s-robust, SPHINCS+-Haraka-256s-simple
  • SPHINCS+-SHA256: SPHINCS+-SHA256-128f-robust, SPHINCS+-SHA256-128f-simple, SPHINCS+-SHA256-128s-robust, SPHINCS+-SHA256-128s-simple, SPHINCS+-SHA256-192f-robust, SPHINCS+-SHA256-192f-simple, SPHINCS+-SHA256-192s-robust, SPHINCS+-SHA256-192s-simple, SPHINCS+-SHA256-256f-robust, SPHINCS+-SHA256-256f-simple, SPHINCS+-SHA256-256s-robust, SPHINCS+-SHA256-256s-simple
  • SPHINCS+-SHAKE256: SPHINCS+-SHAKE256-128f-robust, SPHINCS+-SHAKE256-128f-simple, SPHINCS+-SHAKE256-128s-robust, SPHINCS+-SHAKE256-128s-simple, SPHINCS+-SHAKE256-192f-robust, SPHINCS+-SHAKE256-192f-simple, SPHINCS+-SHAKE256-192s-robust, SPHINCS+-SHAKE256-192s-simple, SPHINCS+-SHAKE256-256f-robust, SPHINCS+-SHAKE256-256f-simple, SPHINCS+-SHAKE256-256s-robust, SPHINCS+-SHAKE256-256s-simple

Note that for algorithms marked with a dagger (†), liboqs contains at least one implementation that uses a large amount of stack space; this may cause failures when run in threads or in constrained environments. For more information, consult the algorithm information sheets in the docs/algorithms folder.

Limitations and Security

While at the time of this writing there are no vulnerabilities known in any of the quantum-safe algorithms used in this library, caution is advised when deploying quantum-safe algorithms as most of the algorithms and software have not been subject to the same degree of scrutiny as for currently deployed algorithms. Particular attention should be paid to guidance provided by the standards community, especially from the NIST Post-Quantum Cryptography Standardization project. As research advances, the supported algorithms may see rapid changes in their security, and may even prove insecure against both classical and quantum computers. Moreover, note that the sntrup761 is only included for interop testing.

liboqs does not intend to "pick winners": algorithm support is informed by the NIST PQC standardization project. We strongly recommend that applications and protocols rely on the outcomes of ths effort when deploying post-quantum cryptography.

We realize some parties may want to deploy quantum-safe cryptography prior to the conclusion of the NIST PQC standardization project. We strongly recommend such attempts make use of so-called hybrid cryptography, in which quantum-safe public-key algorithms are used alongside traditional public key algorithms (like RSA or elliptic curves) so that the solution is at least no less secure than existing traditional cryptography.

WE DO NOT CURRENTLY RECOMMEND RELYING ON THIS LIBRARY IN A PRODUCTION ENVIRONMENT OR TO PROTECT ANY SENSITIVE DATA. This library is meant to help with research and prototyping. While we make a best-effort approach to avoid security bugs, this library has not received the level of auditing and analysis that would be necessary to rely on it for high security use.

Quickstart

Linux/macOS

  1. Install dependencies:

    On Ubuntu:

      sudo apt install astyle cmake gcc ninja-build libssl-dev python3-pytest python3-pytest-xdist unzip xsltproc doxygen graphviz python3-yaml valgrind

    On macOS, using a package manager of your choice (we've picked Homebrew):

     brew install cmake ninja openssl@1.1 wget doxygen graphviz astyle valgrind
 pip3 install pytest pytest-xdist pyyaml

    Note that, if you want liboqs to use OpenSSL for various symmetric crypto algorithms (AES, SHA-2, etc.) then you must have OpenSSL version 1.1.1 or higher.

  2. Get the source:

     git clone -b main https://github.com/open-quantum-safe/liboqs.git
 cd liboqs

    and build:

     mkdir build && cd build
 cmake -GNinja ..
 ninja

Various cmake build options to customize the resultant artifacts are available and are documented in CONFIGURE.md. All supported options are also listed in the .CMake/alg-support.cmake file, and can be viewed by running cmake -LAH .. in the build directory.

The following instructions assume we are in build.

  1. By default the main build result is lib/liboqs.a, a static library. If you want to build a shared/dynamic library, append -DBUILD_SHARED_LIBS=ON to the cmake -GNinja .. command above and the result will be lib/liboqs.so|dylib|dll. The public headers are located in the include directory. There are also a variety of programs built under the tests directory:

    • test_kem: Simple test harness for key encapsulation mechanisms
    • test_sig: Simple test harness for key signature schemes
    • test_kem_mem: Simple test harness for checking memory consumption of key encapsulation mechanisms
    • test_sig_mem: Simple test harness for checking memory consumption of key signature schemes
    • kat_kem: Program that generates known answer test (KAT) values for key encapsulation mechanisms using the same procedure as the NIST submission requirements, for checking against submitted KAT values using tests/test_kat.py
    • kat_sig: Program that generates known answer test (KAT) values for signature schemes using the same procedure as the NIST submission requirements, for checking against submitted KAT values using tests/test_kat.py
    • speed_kem: Benchmarking program for key encapsulation mechanisms; see ./speed_kem --help for usage instructions
    • speed_sig: Benchmarking program for signature mechanisms; see ./speed_sig --help for usage instructions
    • example_kem: Minimal runnable example showing the usage of the KEM API
    • example_sig: Minimal runnable example showing the usage of the signature API
    • test_aes, test_sha3: Simple test harnesses for crypto sub-components
    • test_portability: Simple test harnesses for checking cross-CPU code portability; requires presence of qemu; proper operation validated only on Ubuntu

    The complete test suite can be run using

     ninja run_tests

  2. To generate HTML documentation of the API, run:

     ninja gen_docs

    Then open docs/doxygen/html/index.html in your web browser.

  3. ninja install can be run to install the built library and include files to a location of choice, which can be specified by passing the -DCMAKE_INSTALL_PREFIX=<dir> option to cmake at configure time. Alternatively, ninja package can be run to create an install package.

Windows

Binaries can be generated using Visual Studio 2019 with the CMake Tools extension installed. The same options as explained above for Linux/macOS can be used and build artifacts are generated in the specified build folders.

If you want to create Visual Studio build files, e.g., if not using ninja, be sure to not pass the parameter -GNinja to the cmake command as exemplified above. You can then build all components using msbuild, e.g. as follows: msbuild ALL_BUILD.vcxproj and install all artifacts e.g. using this command msbuild INSTALL.vcxproj.

Cross compilation

You can cross compile liboqs for various platforms. Detailed information is available in the Wiki.

Documentation

More detailed information on building, optional build parameters, example applications, coding conventions and more can be found in the wiki.

Contributing

Contributions that meet the acceptance criteria are gratefully welcomed. See our Contributing Guide for more details.

License

liboqs is licensed under the MIT License; see LICENSE.txt for details.

liboqs includes some third party libraries or modules that are licensed differently; the corresponding subfolder contains the license that applies in that case. In particular:

  • .CMake/CMakeDependentOption.cmake: BSD 3-Clause License
  • src/common/common.c: includes portions which are Apache License v2.0
  • src/common/crypto/aes/aes_c.c: public domain or any OSI-approved license
  • src/common/crypto/aes/aes*_ni.c: public domain
  • src/common/crypto/sha2/sha2_c.c: public domain
  • src/common/crypto/sha3/xkcp_low : CC0 (public domain), except brg_endian.h and KeccakP-1600-AVX2.s
  • src/common/crypto/sha3/xkcp_low/.../brg_endian.h : BSD 3-Clause License
  • src/common/crypto/sha3/xkcp_low/.../KeccakP-1600-AVX2.s : BSD-like CRYPTOGAMS license
  • src/common/rand/rand_nist.c: See file
  • src/kem/bike/additional: Apache License v2.0
  • src/kem/classic_mceliece/pqclean_*: public domain
  • src/kem/kyber/pqclean_*: public domain
  • src/sig/dilithium/pqclean_*: public domain
  • src/sig/sphincs/pqclean_*: CC0 (public domain)

Acknowledgements

Various companies, including Amazon Web Services, Cisco Systems, evolutionQ, IBM Research, and Microsoft Research have dedicated programmer time to contribute source code to OQS. Various people have contributed source code to liboqs.

Financial support for the development of Open Quantum Safe has been provided by Amazon Web Services, the Canadian Centre for Cyber Security, the Unitary Fund, the NGI Assure Fund, and VeriSign Inc.

Research projects which developed specific components of OQS have been supported by various research grants, including funding from the Natural Sciences and Engineering Research Council of Canada (NSERC); see the source papers for funding acknowledgments.