WebThings Gateway by Mozilla

Web of Things gateway.

If you have a Rasberry Pi, the easiest way to use the gateway is to download and flash a pre-built software image from Mozilla to an SD card. Otherwise you can build it from source yourself (see below).

Prerequisites for Building

Install OS

(If you're just installing on your PC, you can skip this step).

If you're installing on a Raspberry Pi then you may need to set up the OS on the Raspberry Pi first. See here for instructions.

Update Package Cache (Linux only)

Under Ubuntu/Debian Linux:

$ sudo apt update

Under Fedora Linux:

$ sudo dnf --refresh upgrade

Install pkg-config

Under Ubuntu/Debian Linux:

$ sudo apt install pkg-config

Under Fedora Linux:

$ sudo dnf install pkgconfig

Under macOS:

$ brew install pkg-config

Install curl (needed to install nvm)

Under Ubuntu/Debian Linux:

$ sudo apt install curl

Under Fedora Linux:

$ sudo dnf install curl

Install nvm (Recommended)

nvm allows you to easily install different versions of node. To install nvm:

$ curl -o- https://raw.githubusercontent.com/creationix/nvm/v0.34.0/install.sh | bash

Reinitialize your terminal session.

$ . ~/.bashrc

Install node (if you didn't use nvm)

(If you already installed node via nvm you can skip this step)

Follow the directions from NodeJS to install on your platform.

Set up Bluetooth permissions (Linux only)

The following is required in order to let node and python3 use the Bluetooth adapter.

$ sudo setcap cap_net_raw+eip $(eval readlink -f `which node`)
$ sudo setcap cap_net_raw+eip $(eval readlink -f `which python3`)

Install Bluetooth and BT Low Energy support libraries (Linux only)

The following are required in order to install the Python modules that support Bluetooth

Under Ubuntu/Debian Linux:

$ sudo apt install libboost-python-dev libboost-thread-dev libbluetooth-dev libglib2.0-dev

Under Fedora Linux:

$ sudo dnf install boost-python2-devel boost-python3-devel boost-devel bluez-libs-devel glib2-devel

Install libusb and libudev (Linux only)

Under Ubuntu/Debian Linux:

$ sudo apt install libusb-1.0-0-dev libudev-dev

Under Fedora Linux:

$ sudo dnf install libudev-devel libusb1-devel

Install autoconf

Under Ubuntu/Debian Linux:

$ sudo apt install autoconf

Under Fedora Linux:

$ sudo dnf install autoconf

Under macOS:

$ brew install autoconf

Install libpng (Linux only)

Under x86-64 or x86 Ubuntu/Debian Linux:

$ sudo apt install libpng16-16

Under ARM Ubuntu/Debian Linux:

$ sudo apt install libpng-dev

Under Fedora Linux:

$ sudo dnf install libpng-devel

Install git

You'll need git to checkout the repositories.

Under Ubuntu/Debian Linux:

$ sudo apt install git

Under Fedora Linux:

$ sudo dnf install git

Install gcc

Under Ubuntu/Debian Linux:

$ sudo apt install build-essential

Under Fedora Linux:

$ sudo dnf group install "C Development Tools and Libraries"

Install nanomsg

Linux

Under Ubuntu/Debian Linux:

$ sudo apt install libnanomsg4 libnanomsg-dev

Note: you may need to use libnanomsg5 instead of libnanomsg4 (under Debian buster, for example)

Windows

Follow the directions from nanomsg to install in the same bitness as your Python 3.X.
If you want to build for 64-bit, you need to execute cmake with -DCMAKE_GENERATOR_PLATFORM=x64.
Add C:\path\to\nanomsg\bin to PATH.

MacOS

Under macOS:

$ brew install nanomsg

Install OpenSSL (Windows only)

The Gateway depends on ursa, which requires OpenSSL.

Install OpenSSL =< 1.0.2 (normal, not light) in the same bitness as your Node.js.

See here.

Install Python 2.7 (Windows only)

PageKite works with Python 2.7.

Install Python 2.7 from here.

Enable "register extensions" on installing package, or associate file extension .py with python.

Install Python 3.X (Optional, Windows only)

This is required in order to use Python 3 add-ons, e.g. tplink-adapter.

Install Python 3.4+ from here.
- Enable "Install launcher for all users" and "Add Python 3.X to PATH" on installing.
- Enable python3 command using the following.

mklink "C:\path\to\python3\python3.exe" "C:\path\to\python3\python.exe"

Install nnpy

git clone https://github.com/nanomsg/nnpy.git
cd nnpy

Add a file: site.cfg

[DEFAULT]
include_dirs = C:\path\to\nanomsg\include\nanomsg
library_dirs = C:\path\to\nanomsg\lib
host_library = C:\path\to\nanomsg\bin\nanomsg.dll

Install Python Add-on Bindings (Optional)

This is required in order to use Python 3 add-ons, e.g. tplink-adapter.

Execute the following command. On Linux, use sudo. On Windows, run as administrator.

python3 -m pip install git+https://github.com/mozilla-iot/gateway-addon-python#egg=gateway_addon

Note: 2018-04-12: pip3 has an issue with some languages.

Download and Build Gateway

Clone the GitHub repository (or fork it first):

$ git clone https://github.com/mozilla-iot/gateway.git

Change into the gateway directory:
```
$ cd gateway
```
If you have chosen to install nvm above, install and use an LTS version of node and then set the default version. The .nvmrc file will be used by nvm to determine which version of node to install.
```
$ nvm install
$ nvm use
$ nvm alias default $(node -v)
```
Verify that node and npm have been installed:
```
$ node --version
v8.15.1
$ npm --version
6.4.1
```
Note: these versions might differ from the LTS version installed locally.
Install dependencies:
```
$ npm install
```

Add Firewall exceptions (Fedora Linux Only)

$ sudo firewall-cmd --zone=public --add-port=4443/tcp --permanent
$ sudo firewall-cmd --zone=public --add-port=8080/tcp --permanent
$ sudo firewall-cmd --zone=public --add-port=5353/udp --permanent

Set up domain:
- If you plan to use Mozilla's provided tunneling service to set up a *.mozilla-iot.org domain:
  - Start the web server:
```
$ npm start
```
  - Load http://localhost:8080 in your web browser (or use the server's IP address if loading remotely). Then follow the instructions on the web page to set up domain and register. Once this is done you can load https://localhost:4443 in your web browser (or use the server's IP address if loading remotely).
- If you plan to use your own SSL certificate:
  - The HTTPS server looks for privatekey.pem and certificate.pem in the ssl sub-directory of the userProfile directory specified in your config. You can use a real certificate or generate a self-signed one by following the steps below.
```
$ MOZIOT_HOME="${MOZIOT_HOME:=${HOME}/.mozilla-iot}"
$ SSL_DIR="${MOZIOT_HOME}/ssl"
$ [ ! -d "${SSL_DIR}" ] && mkdir -p "${SSL_DIR}"
$ openssl genrsa -out "${SSL_DIR}/privatekey.pem" 2048
$ openssl req -new -sha256 -key "${SSL_DIR}/privatekey.pem" -out "${SSL_DIR}/csr.pem"
$ openssl x509 -req -in "${SSL_DIR}/csr.pem" -signkey "${SSL_DIR}/privatekey.pem" -out "${SSL_DIR}/certificate.pem"
```
  - Start the web server:
```
$ npm start
```
  - Load https://localhost:4443 in your web browser (or use the server's IP address if loading remotely). Since you're using a self-signed certificate, you'll need to add a security exception in the browser.

Browser Support

The Gateway only supports the following browsers, due to its use of the Fetch API and WebSocket API:

Firefox 52+
Chrome 43+
Edge 14+
Safari 10.1+
Opera 29+

Debugging

If you are using VS Code, simply use the "launch" target. It will build the gateway in debugger mode.

If you are not using VS Code, run npm run debug and it will build the gateway and launch it with --inspect.

Install additional dependencies for Test (Debian)

These steps are required on Debian (where python points to python 2.7)

$ sudo apt install python-pip python3-pip firefox openjdk-8-jre
$ sudo python3 -m pip install git+https://github.com/mycroftai/adapt#egg=adapt-parser

Running Tests

To run the linter and all tests:

$ npm test

To run a single test:

$ jest src/test/{test-name}.js

(assumes you have the jest command on your PATH, otherwise use ./node_modules/jest/bin/jest.js)

To compare UI with parent branch:

$ npm run screenshots
$ npm test

(if you have the screenshots in the folder ./browser-test-screenshots, npm test should compare UI with screenshots stored)

Source Code Structure

config/ - Gateway configuration files
image/ - Tools for building the Raspberry Pi image
src/
- addons-test/ - Add-ons used strictly for testing
- controllers/ - App URL routes and their logic
- models/ - Data model and business logic
- platforms/ - Platform-specific functionality
- plugin/ - Utility classes and methods used by add-ons
- rules-engine/ - The rules engine
- test/ - Integration tests
- views/ - HTML views
- addon-loader.js - Script used for starting up Node-based add-ons
- addon-manager.js - Manages add-ons (e.g. Zigbee, Z-Wave)
- app.js - The main back end
- app-instance.js - Application wrapper for integration tests
- certificate-manager.js - Certificate registration and renewal, via Let's Encrypt
- command-utils.js - Utilities used by commands parser
- constants.js - System-wide constants
- db.js - Manages the SQLite3 database
- deferred.js - Wraps up a promise in a slightly more convenient manner for passing around, or saving
- dynamic-require.js - Small utility to require code from file system, rather than webpacked bundle
- ec-crypto.js - Elliptic curve helpers for the ES256 curve
- jwt-middleware.js - Express middleware for determining authentication status
- log-timestamps.js - Utilities for adding timestamps to console logging functions
- mdns-server.js - mDNS server
- oauth-types.js - OAuth types
- passwords.js - Password utilities
- platform.js - Platform-specific utilities
- push-service.js - Push notification service
- router.js - Routes app URLs to controllers
- router-setup.js - Initial router setup code for OpenWrt
- sleep.js - Small utility to implement a promise-based sleep
- ssltunnel.js - Utilities to determine state of tunnel and manage the PageKite process
- user-profile.js - Manages persistent user data
- utils.js - Various utility functions
- wifi-setup.js - Initial Wi-Fi setup code for Raspbian
static/ - Static CSS, JavaScript & image resources for web app front end
tools/ - Helpful utilities (not part of the build)
package.json - npm module manifest

tialm/gateway

WebThings Gateway by Mozilla

Prerequisites for Building

Install OS

Update Package Cache (Linux only)

Install pkg-config

Install curl (needed to install nvm)

Install nvm (Recommended)

Install node (if you didn't use nvm)

Set up Bluetooth permissions (Linux only)

Install Bluetooth and BT Low Energy support libraries (Linux only)

Install libusb and libudev (Linux only)

Install autoconf

Install libpng (Linux only)

Install git

Install gcc

Install nanomsg

Linux

Windows

MacOS

Install OpenSSL (Windows only)

Install Python 2.7 (Windows only)

Install Python 3.X (Optional, Windows only)

Install Python Add-on Bindings (Optional)

Download and Build Gateway

Browser Support

Debugging

Install additional dependencies for Test (Debian)

Running Tests

Source Code Structure