These are instructions for how to reproduce the results from the Memsys2016 paper. The experiments were done with the following equipment: + A WattsUpPro power meter (USB) hooked to a recording device + A MeasurementComputing USB 1608FS-PLUS A/D converter + Various DIMM extender boards instrumented with sense resistors + A custom ATX-P4 measurement cable connected to an ACS715 Hall effect Sensor (Pololu #1186) + An INA122 instrumentation amplifier amplified the differential voltage across the DIMM sense resistor. + A serial port with a wire coming from the DTR line that we hook up to the ADC for synchronization purposes Tools used: Besides the ones included here, also we used the wattsup and mc1608fs-plus tools found at https://github.com/deater/uarch-configure Subdirectories: benchmarks: list info on the benchmarks used, how to build and run them serial_port: has code for toggling serial port pins