timvideos/HDMI2USB-mode-switch

Issues

• Flashing fails if path to firmware binary has a space in it

  #112 opened 4 years ago by puck
  0

• the litex-hub/litex-buildenv-udev project and the /udev directory aren't kept in sync

  #109 opened 5 years ago by baldurmen
  0

• assert len(exart_uarts) == len(atlys_boards) (sometimes)

  #106 opened 5 years ago by CarlFK
  9

• Error: double-check your JTAG setup

  #107 opened 5 years ago by CarlFK
  0

• Make the download-prebuilt script support Python 3.

  #81 opened 5 years ago by mithro
  1

• unsupported operand type(s) for +: 'set' and 'set' retry_error_msgs+fatal_error_msgs

  #103 opened 5 years ago by CarlFK
  1

• Add a "--version" to download-firmware script.

  #91 opened 7 years ago by mithro
  4

• Detect "Error: Unknown flash device (ID 0x00ffffff)" on Digilent Atlys

  #24 opened 8 years ago by mithro
  1

• --by-dna to pick a board errors

  #99 opened 7 years ago by CarlFK
  0

• Convert download-prebuilt-firmware script to use new files

  #98 opened 7 years ago by mithro
  2

• Make download-firmware support sending GitHub authentication requests

  #94 opened 7 years ago by mithro
  0

• Make download-firmware respect a users proxies

  #93 opened 7 years ago by mithro
  0

• Merged download-firmware script into the mode switch properly.

  #92 opened 7 years ago by mithro
  0

• Add a "quiet" and "verbose" modes to download-firmware script

  #90 opened 7 years ago by mithro
  0

• Add download progress bar

  #89 opened 7 years ago by mithro
  0

• Verify / check the downloaded image in some way?

  #88 opened 7 years ago by mithro
  0

• When getting unable walk back through versions if the target isn't found in the latest version

  #87 opened 7 years ago by mithro
  0

• conda.mk fix

  #78 opened 7 years ago by CarlFK
  1

• setup: ImportError: No module named 'setuptools'

  #77 opened 7 years ago by CarlFK
  1

• root:unbind-helper not found - check for permission rather then just assume

  #75 opened 7 years ago by CarlFK
  0

• Reset the fpga after flashing (or tell them to power cycle it)

  #23 opened 8 years ago by mithro
  1

• --get-video-device => ???

  #73 opened 7 years ago by CarlFK
  0

• error in error handler: TypeError: 'NotImplementedType' object is not callable

  #72 opened 7 years ago by CarlFK
  0

• --get-state doesn't report the state

  #71 opened 7 years ago by CarlFK
  0

• make conda doesn't print the needed path

  #59 opened 7 years ago by CarlFK
  0

• check that boards are not plugged in when reloading udev

  #60 opened 7 years ago by CarlFK
  0

• make firmware-load does not work for opsis

  #62 opened 7 years ago by joeladdison
  1

• Add Numato Mimas V2 support for MicroPython on FPGA & Linux on LiteX development

  #63 opened 7 years ago by mithro
  0

• openocd error

  #57 opened 7 years ago by CarlFK
  1

• udev rules should blacklist the exart / vizzini hardware UART on the Atlys from the USB-CDC ACM driver (and maybe warn about the condition)

  #58 opened 7 years ago by mithro
  5

• Check that version is working properly in the debian packages

  #50 opened 8 years ago by mithro
  1

• EEPROM reading and flashing support

  #27 opened 8 years ago by mithro
  1

• python3 setup.py install = ImportError: No module named 'setuptools'

  #25 opened 8 years ago by CarlFK
  1

• setup.py should have a requirements comment

  #36 opened 8 years ago by ekohilas
  0

• Attempts at running on windows

  #37 opened 8 years ago by ekohilas
  0

• Make tool run on Windows

  #39 opened 8 years ago by mithro
  0

• Add ability to probe the version of the firmware/gateware on the FPGA

  #48 opened 8 years ago by mithro
  0

• Add a --version option

  #47 opened 8 years ago by mithro
  0

• AttributeError: 'CalledProcessError' object has no attribute 'stdout'

  #40 opened 8 years ago by mithro
  0

• bytes swapped

  #38 opened 8 years ago by CarlFK
  0

• TypeError: b'\x00' (b'\x00') != ('\x00')

  #34 opened 8 years ago by CarlFK
  1

• Check for common issues when flashing

  #33 opened 8 years ago by mithro
  1

• Figure out how to associate Exar USB UART with a given Atlys board

  #14 opened 8 years ago by mithro
  0

• Make the find-board `--by-xxxx` arguments work

  #15 opened 8 years ago by mithro
  0

• Serial port accessing stuff

  #16 opened 8 years ago by mithro
  0

• Make the find-board `--get-xxxx` arguments work

  #17 opened 8 years ago by mithro
  0

• Figure out why the tests are segfaulting on travis

  #21 opened 8 years ago by mithro
  0

• Make sure you flash/load the right type of file

  #22 opened 8 years ago by mithro
  0

• atlys-flash.sh uses hdmi2usb-mode-switch.py

  #19 opened 8 years ago by CarlFK
  0

• Create udev rules which group the serial, video and usbdev devices together

  #13 opened 8 years ago by mithro
  0