tinfever/FU-Dyson-BMS

Issues

• V8 SV10 PCB pics

  #47 opened 9 months ago by npaisnel
  2

• Snap Programmer + MPLAB IPE is ineffective

  #58 opened 2 months ago by BAM5
  0

• Original Firmware Fix

  #34 opened a year ago by chaddyyyy
  12

• Dyson V8 - BMS 180207-01/04 - Battery SV10

  #19 opened 2 years ago by accampato
  6

• Regarding the max temperature limit of lithium battery charging and discharging

  #56 opened 4 months ago by turenabo
  1

• Where Google Sheet About Related Thermistor?

  #53 opened 3 months ago by KerisKR
  2

• Using PIC k150 to programming chip?

  #57 opened 4 months ago by qipsys
  1

• Regenerate firmware with temperature annotations removed

  #42 opened a year ago by liujixu1984
  5

• Works on Dyson V8 (YH5)

  #30 opened 2 years ago by justinmassiot
  6

• When the charger is disconnected from mains electricity, the vacuum cleaner will work briefly

  #55 opened 5 months ago by turenabo
  1

• Dyson V8 Battery 180207 Overcurrent

  #12 opened 2 years ago by karatektus
  8

• Old Battery BMS (DC35) 17083-22 12

  #18 opened 2 years ago by erguro1973
  3

• V11 v15

  #54 opened 6 months ago by furaxxxx
  0

• How to Compile From MPLAB X IDE To Hex.file?

  #52 opened 6 months ago by KerisKR
  1

• V6 PCB: 233718 FU-Dyson-BMS compatible?

  #51 opened 7 months ago by Boysolder
  2

• Is it possible to use rasberry PI or arduino to program the firmware?

  #50 opened 8 months ago by JacksonC2024
  2

• Some notes from successful re-programming

  #24 opened 2 years ago by NeilMarley
  5

• strange red flashes

  #31 opened 2 years ago by jnpa007
  2

• 12 blue flashes and 70 yellow flashes

  #49 opened 9 months ago by Garovich
  4

• v6 flashes red light 16 times

  #48 opened 9 months ago by TonyJOE598
  1

• Ghost Triggers on V6

  #46 opened 9 months ago by SupaCoder
  2

• Programming with PICKIT2 successful

  #25 opened 9 months ago by ibarrajo
  3

• 1 yellow flashing , but all cells are balanced, under 10mV difference

  #45 opened 10 months ago by turenabo
  1

• Dyson SV10 - 10 Red lights

  #44 opened a year ago by thechosen2k
  1

• Can't be fully charged if only check voltage

  #43 opened a year ago by turenabo
  2

• Why temperature sampling circuits are different on 188002 and 61462?

  #41 opened a year ago by turenabo
  5

• v6 Low temperature protection

  #39 opened a year ago by liujixu1984
  6

• How to compile firmware

  #40 opened a year ago by liujixu1984
  4

• Low-battery cutoff always activates, excessive cell balance indicator flashes despite good cells, v6 188002

  #38 opened a year ago by liujixu1984
  4

• Possible to flash using a Flipper Zero?

  #37 opened a year ago by zhast
  1

• Bizarre SV03 issue

  #36 opened a year ago by dickeos
  6

• Flashed - was working now not

  #35 opened a year ago by ShukranPovo
  8

• SV03 PCB 188002 V6

  #23 opened a year ago by chaddyyyy
  1

• Dyson V7 - PCB 228499 - Compatible + Tested

  #14 opened 2 years ago by NemoLee
  18

• DYSON V7 SV11 228499 0103

  #33 opened a year ago by chaddyyyy
  3

• Dyson V10 Battery pack PCB

  #11 opened 2 years ago by black-raison-detre
  17

• PCB188002, 8 red flashes & 16 red flashes

  #32 opened a year ago by turenabo
  2

• Sv03 BMS PCB

  #29 opened 2 years ago by heathenchildde
  1

• V6, don't know how to identify the version of the PCB，and don't know whether the battery is locked or not

  #21 opened 2 years ago by kanelau
  14

• How to do? Fix the power On, after pressing and releasing non fixing button

  #28 opened 2 years ago by Lexusrus
  0

• Problème du Dyson bms

  #27 opened 2 years ago by slimlesaurien
  0

• When to flash the firmware?

  #26 opened 2 years ago by Tharrington86
  2

• SV11 battery dies around 3.6v on SV11

  #22 opened 2 years ago by Fixatron
  0

• SV10 images if you still need them

  #20 opened 2 years ago by Aleksey1406
  4

• The blue LED is always on

  #17 opened 2 years ago by vid8266
  1

• Made a tiny bit of progress.

  #16 opened 2 years ago by aldoguzman97
  1

• Dyson V7-SV11-PCB228499...maybe...dead

  #15 opened 2 years ago by YorkYYY
  4

• DYSON V7 COMPLETE SV11 BATTERY

  #13 opened 2 years ago by lazmania
  1

• Dyson v8 SV10 - PCB 233725-01/04

  #10 opened 2 years ago by yarix
  4

• Dyson V8 - Model SV10 - PCB 180207 trigger pull not waking up

  #9 opened 2 years ago by slyker001
  10