tinypico/tinypico-hardware

Issues

• PCB Dimensions for footprint and Shield Ground

  #29 opened 4 months ago by JL1946
  5

• TinyPICO.sch and TinyPICO.brd

  #28 opened 2 years ago
  2

• Comment GPS / GNSS / GSM / GPRS shield

  #27 opened 2 years ago by Galaxy-Man
  1

• tinypico not upload program using platformio with micro USB

  #26 opened 2 years ago by waqas-subhani
  1

• Which contact is GPIO13?

  #25 opened 3 years ago by CluckCluckChicken
  0

• How are the values of L1, C4 and C5 decided?

  #3 opened 5 years ago by dataplayer12
  16

• Tinypico-CAN

  #22 opened 3 years ago by Joggie865
  0

• Where can I download a 3D Model?

  #7 opened 5 years ago by Pro
  4

• Charging current resistor hint correction

  #21 opened 3 years ago by Techspiring
  0

• Honored but not sure if it was an accident.

  #13 opened 3 years ago by Leviathan3DPrinting
  1

• Other I2C pin than IO21 and IO22

  #18 opened 3 years ago by bilaljo
  3

• Sensing when USB power is present on V1 boards

  #19 opened 3 years ago by Paraphraser
  1

• Unable to flash tiny pico nano

  #20 opened 3 years ago by bilaljo
  7

• C23 is a duplicate of C1?

  #15 opened 3 years ago by FreezeS
  1

• Casing of R3 PROG (Tiny PICO Nano)

  #17 opened 3 years ago by bilaljo
  2

• tinypico board layout

  #16 opened 3 years ago by bilaljo
  5

• STL files

  #14 opened 3 years ago by Death111
  2

• No schematic for the tinypico nano

  #12 opened 4 years ago by Leviathan3DPrinting
  1

• Schematic for RGB IPS Display Shield

  #11 opened 4 years ago by patfelst
  3

• Req: Missing part libraries

  #10 opened 5 years ago by henrygab
  5

• how much current will the gpio35 draw?

  #5 opened 5 years ago by dukeduck1984
  3

• Add ov2460 camera

  #6 opened 5 years ago by dontsovcmc
  1

• Low-Battery / Over discharge

  #9 opened 5 years ago by CrappyTan
  3

• External 5V Power supply and USB 5V at the same time?

  #8 opened 5 years ago by Pro
  3

• Gerbers_274X TinyPICO.sol

  #4 opened 5 years ago by SZ-MXK
  1

• Please consider maintaining "official" KiCAD footprint and symbol libaries.

  #1 opened 5 years ago
  1

• Eagle and Gerbers do not match

  #2 opened 5 years ago by fcapano
  1