tjeter

AdvancedCalculator

This program is written in the python language. It is to resemble a simplified version of a TI calculator that includes numerous functions

AlarmSystem_TinkerCad

This is a program for a security alarm system in TinkerCad based on a PIR motion sensor and reaction to any motion detected by the PIR motion sensor. The main idea is for the user to activate/lock a security system by entering a default passcode (Passcode: #) by using the keypad. When the system is activated, the green LED turns on and the program begins reading for a signal from the connected PIR motion sensor. If any motion has been detected, the green LED is then turned off and the program sends “Motion Detected!” message to the LCD display screen. This triggers the generation of an alarm tone on the buzzer along with the red LED turned on until no motion is detected anymore. When no motion is detected, only the system’s state “Armed” is displayed on the LCD display screen and green LED is on. The user can deactivate/unlock the security system by providing the second default passcode (Passcode: *) by using the keypad. If the system is not active the system’s state “Disarmed” is displayed on the LCD display screen. In this case, when the system is not active the program will not respond to the changes of the PIR motion sensor value.

AMG2023

Algebraic multigrid solver

AVL-Tree

A simple implementation of an AVL Tree.

build-your-own-x

🤓 Build your own (insert technology here)

Caliper

Caliper is an instrumentation and performance profiling library

Laplace-Transform-Calculator

Neural-Networks-and-Deep-Learning

This repository contains the programming assignments from the course EEL 6814 at the University of Florida.

P2P-Network

This is the setup for a Peer-to-Peer Network similar to BitTorrent

spack

A flexible package manager that supports multiple versions, configurations, platforms, and compilers.

tjeter/AlarmSystem_TinkerCad

This is a program for a security alarm system in TinkerCad based on a PIR motion sensor and reaction to any motion detected by the PIR motion sensor. The main idea is for the user to activate/lock a security system by entering a default passcode (Passcode: #) by using the keypad. When the system is activated, the green LED turns on and the program begins reading for a signal from the connected PIR motion sensor. If any motion has been detected, the green LED is then turned off and the program sends “Motion Detected!” message to the LCD display screen. This triggers the generation of an alarm tone on the buzzer along with the red LED turned on until no motion is detected anymore. When no motion is detected, only the system’s state “Armed” is displayed on the LCD display screen and green LED is on. The user can deactivate/unlock the security system by providing the second default passcode (Passcode: *) by using the keypad. If the system is not active the system’s state “Disarmed” is displayed on the LCD display screen. In this case, when the system is not active the program will not respond to the changes of the PIR motion sensor value.

tjeter/AdvancedCalculator

This program is written in the python language. It is to resemble a simplified version of a TI calculator that includes numerous functions

tjeter/AMG2023

Algebraic multigrid solver

tjeter/AVL-Tree

A simple implementation of an AVL Tree.

tjeter/build-your-own-x

🤓 Build your own (insert technology here)

tjeter/Caliper

Caliper is an instrumentation and performance profiling library

tjeter/Cipher-Complex

Cipher tool that allows the use of Caesar Cipher, Vigenere Cipher, Playfair Cipher, Monoalphabetic Cipher, Base64, XOR, and Hashing (SHA256, SHA512, and MD5)

tjeter/Laplace-Transform-Calculator

tjeter/Neural-Networks-and-Deep-Learning

This repository contains the programming assignments from the course EEL 6814 at the University of Florida.

tjeter/P2P-Network

This is the setup for a Peer-to-Peer Network similar to BitTorrent

tjeter/spack

A flexible package manager that supports multiple versions, configurations, platforms, and compilers.

tjeter/FibonacciSequence

This program is to display the Fibonacci Sequence using the Assembly Language

tjeter/FIRESTARTER

FIRESTARTER: A Processor Stress Test Utility. This repository contains the source code generator. Our releases (including the generated source code and precompiled binaries) are available at https://tu-dresden.de/zih/firestarter/.

tjeter/hello-world

First repository

tjeter/IPro

tjeter/markdown-cheatsheet

Markdown Cheatsheet for Github Readme.md

tjeter/ML-For-Beginners

12 weeks, 25 lessons, 50 quizzes, classic Machine Learning for all

tjeter/MSR_PKG_PWR_LIMIT-Register

This program finds the values in the open fields of Intel's MSR_PKG_POWER_LIMIT Register in terms of power in watts and in terms of time in seconds

tjeter/openssl

TLS/SSL and crypto library

tjeter/Platypus

Platypus Educational Samples

tjeter/ProgramBuilder

This program is written in the java language. It allows a user to pick which language they want their program to be outputted in. The options are Python, C, and C++

tjeter/ProjectEuler

A run through of project Euler problems. Implementations are in the C programming language.

tjeter/qemu

Official QEMU mirror. Please see http://wiki.qemu.org/Contribute/SubmitAPatch for how to submit changes to QEMU. Pull Requests are ignored. Please only use release tarballs from the QEMU website.

tjeter/STREAM

STREAM benchmark

tjeter/Sudoku

This program will determine if a 9x9 matrix is a Sudoku solution or not

tjeter/TrafficLight

This program is to represent a traffic light in using the Assembly Language

tjeter/Twofish

Cryptography: Twofish Implementation In C

tjeter/variorum

Vendor-neutral library for exposing power and performance features across diverse architectures