toblum/McLighting

Issues

• Error compiling mclighting v3

  #506 opened 3 years ago by frekkia
  0

• Change Wifi Network

  #504 opened 3 years ago by VeniceNerd
  3

• connecting Octoprint (raspberry pi 4) to ESP8266 as the controller.

  #503 opened 3 years ago by ShadowOfTheDamn
  4

• Led Reagieren nicht.

  #461 opened 5 years ago by Pete28
  8

• Compile Error ...

  #502 opened 4 years ago by pierpe83
  1

• Build error

  #500 opened 4 years ago by cralex11
  3

• Start Problems ESP 8266 & WS2811

  #501 opened 4 years ago by corincorvus
  0

• Flash Size ESP8266 2.7.4

  #499 opened 4 years ago by mbudde86
  1

• USE_WS2812FX_UART1

  #498 opened 4 years ago by dieterdrost
  0

• Home assistant Support

  #497 opened 4 years ago by Spin5123
  0

• Adding a selector switch in homebridge

  #496 opened 4 years ago by redfirebrooks
  0

• No Wifi Network

  #495 opened 4 years ago by Crusher94
  1

• McLighting (esp8266)

  #494 opened 4 years ago by Mikailo09
  4

• Enable TV over MQTT

  #478 opened 5 years ago by gulliverrr
  2

• No response on MQTT "<HOSTNAME>/in"

  #480 opened 5 years ago by maxledfreak
  1

• NUMLEDS Error

  #493 opened 4 years ago by ChrisYOLO
  1

• What syntax should I use for domoticz

  #492 opened 4 years ago by redfirebrooks
  1

• Changing led pin issue?

  #489 opened 4 years ago by huge-11
  5

• No Wifi connection although AP-Mode is quit

  #491 opened 4 years ago by Riichboy
  0

• E1.31 animations very laggy

  #490 opened 4 years ago by LeoLTM
  0

• config file Wifi manager

  #483 opened 5 years ago by RubiRubsn
  8

• Issues setting up Adafruit_MQTT configuration from wifiManager in Arduino

  #488 opened 4 years ago by Behzad-6-1
  0

• Cant Open/Import McLightingApp.aia

  #486 opened 5 years ago by huge-11
  2

• Change Hostname ?

  #487 opened 5 years ago by FraatGIT
  1

• Ich Komme nicht weiter

  #485 opened 5 years ago by CapatainArcherx
  3

• Project won't compile

  #484 opened 5 years ago by phm07
  1

• Blink when I change number of led in live

  #481 opened 5 years ago by pbenaim
  2

• control over the network with Artnet or tpm2.net?/übers Netzwerk steuern mit Artnet oder tpm2.net?

  #479 opened 5 years ago by KoggeHD
  2

• installing mc lighting with hassio

  #473 opened 5 years ago by nickpesman
  2

• Saving cfg: Failed!

  #477 opened 5 years ago by Floppynator
  0

• retry

  #476 opened 5 years ago by tzarkyl
  1

• undefined items

  #475 opened 5 years ago by tzarkyl
  1

• which Websocket library

  #474 opened 5 years ago by ramsbod
  2

• 'DynamicJsonDocument' was not declared in this scope

  #472 opened 5 years ago by JHershey69
  1

• How can i control LED no. over 99 with range_RGB

  #464 opened 5 years ago by Stormbringer11
  1

• Stair lightning with McLightning over iobroker

  #465 opened 5 years ago by Nussert
  3

• MQTT Only works first time after compiling sketch

  #471 opened 5 years ago by MaikoHermans
  0

• Red and Green swapped

  #469 opened 5 years ago by Synthron
  1

• 'class WS2812FX' has no member named 'setOptions'

  #468 opened 5 years ago by LordDuplo
  1

• Error in compilling

  #467 opened 5 years ago by n-ban
  0

• Additional McLighting Slave Nodes

  #466 opened 5 years ago by hawk090535
  1

• Please add optional support for TPM2.net

  #463 opened 5 years ago by mherweg
  0

• via mqtt Payload: !<numled><hexrgb> i can only set leds from lednumber 00-99 but not higher?

  #460 opened 5 years ago by zen85
  1

• cannot compile

  #459 opened 5 years ago by cjs1502
  3

• Two small led

  #457 opened 5 years ago by alfredolo
  6

• Wifi lost after channel change

  #456 opened 5 years ago by dioem1985
  0

• LEDs are set to "flicker" mode automaticaly

  #455 opened 5 years ago by mattdo4412
  1

• Lights turned off by default after power failure?

  #454 opened 5 years ago by guardiande
  3

• Wifi config gone after reboot

  #453 opened 5 years ago by benvandijk84
  0

• Very strange esp01s boot problem

  #452 opened 5 years ago by Skillertheking
  0