vpnrotator: A Shell repository from tomarraj008

VPN ROTATOR

This project is intended for security researchers and offers the following benefits:

Add multiple machines (virtual and/or physical) behind the same VPN(s)
Prevent exposing your private IP address in case of VPN disconnection/failure
Combine multiple VPN providers without having to install their proprietary software
Easily rotate VPN locations for malicious traffic replays

The VPN rotator is a VM (or physical machine) that sends and receives all the traffic going through your network. In other words, the devices that are behind it are isolated from the Internet. This provides a safe environment not exposing your (residential) ISP connection.

This project found its name (VPN Rotator) in the act of rotating or cycling through VPN locations to reproduce malware traffic. As such, it is easy to rotate within countries for the same or multiple VPN providers. This allows you to add accounts for several different providers and seemlessly rotate within access points, wihtout having to use their proprietary software.

Requirements

Virtual or bare metal machine
One or more commercial VPN accounts

1) Create new VM

Type: Linux
Version: Debian (64-bit)
Memory size: 512 MB (or more)
Hard disk: VDI, Dynamic, 8 GB
Before starting the VM, change its Network Settings: -> Adapter 1: Bridged Adapter (Promiscuous Mode: Deny) -> Adapter 2: Internal Network (Promiscuous Mode: Allow VMs)

2) Install Debian with the following options

Download Debian ISO (debian-10.1.0-amd64-xfce-CD-1.iso)
Choose Install (second option)
Primary network interface -> Chose the first one
Hostname: vpn
Domain: Leave blank
User name and passwords: (your choice)
Software to install: -> uncheck everything and check: SSH server Standard System utilities

3) Get updates

Get root (type su and enter)

apt-get update

apt-get install psmisc unzip openvpn curl dos2unix

4) Configure /etc/network/interfaces

nano /etc/network/interfaces

** Edit with the name of your ethernet cards and IP range ** (type ip link show to reveal the name of your ethernet cards)

    # The loopback network interface
    auto lo
    iface lo inet loopback

    # The bridged network interface
    allow-hotplug enp0s3
    iface enp0s3 inet static
    address 192.168.1.168
    netmask 255.255.255.0
    gateway 192.168.1.1
    network 192.168.1.0
    broadcast 192.168.1.255
    dns-nameservers 1.1.1.1 1.0.0.1

    # the internal-only network interface
    allow-hotplug enp0s8
    iface enp0s8 inet static
    address 192.168.3.1
    netmask 255.255.255.0
    network 192.168.3.0
    broadcast 192.168.3.255
    dns-nameservers 1.1.1.1 1.0.0.1

5) Configure additional network settings

nano /etc/sysctl.conf

Uncomment net.ipv4.ip_forward=1

Uncomment (if you want to enable IPv6) net.ipv6.conf.all.forwarding=1

Add the following at the end of the file if you want to disable IPV6

    # These edits EXPLICITLY disable IPV6
    net.ipv6.conf.all.disable_ipv6 = 0
    net.ipv6.conf.default.disable_ipv6 = 0
    net.ipv6.conf.lo.disable_ipv6 = 0
    net.ipv6.conf.eth0.disable_ipv6 = 0

Edit the vpnservice.sh file based on your network's gateway for the Internal NIC (in the example below, it assumes it is on 192.168.3.x)

    iptables -A INPUT -s 192.168.3.0/24 -j DROP

6) Copy necessary files

(individually or simply ZIP them and then SCP)

    scp countries.txt vpn@192.168.1.168:/home/vpn/
    scp dn.sh vpn@192.168.1.168:/home/vpn/
    scp up.sh vpn@192.168.1.168:/home/vpn/
    scp VPN.sh vpn@192.168.1.168:/home/vpn/
    scp vpnservice.sh vpn@192.168.1.168:/home/vpn/

Make scripts executable

chmod +x *.sh

7) Reboot VM

/sbin/reboot

8) Launch VPN rotator

On first setup, you will need to create profiles to add new VPN providers. This requires the URL to a ZIP for .ovpn files and your username and password for that VPN provider. The script will then download and sort all the .ovpn files automatically into folders by country and provider.

tomarraj008/vpnrotator