ATXRaspi is a smart power controller for RaspberryPi that allows you to poweroff or reboot your Pi from a momentary switch (with LED status).
For the latest revision and details please see the official ATXRaspi Guide.
Wiring your Pi to ATXRaspi
- GPIO7 (input to Pi) to outgoing arrow pin on ATXRaspi.
- GPIO8 (output from Pi) goes to incoming arrow pin on ATXRaspi.
- Connect power from output header (+/-) of ATXRaspi to GPIO power pins (5V/GND) on RaspberryPi (or straight through USB if you have that soldered).
- Connect a momentary button and status LED to ATXRaspi (no resistor needed for LED). You can also get LED integrated momentary switches from the LowPowerLab webshop.
Log into your Pi an run the setup script, then remove it and reboot:
sudo wget https://raw.githubusercontent.com/LowPowerLab/ATX-Raspi/master/shutdownchecksetup.sh
sudo bash shutdownchecksetup.sh
sudo rm shutdownchecksetup.sh
sudo reboot