tommyjlong/platinum-weather-card

This is a fully customisable weather card for Home Assistant with a graphical configuration.

Platinum Weather Card

A highly configurable weather card with a graphical configuration. Based on original Platinum Weather Card by @makin-things

Need Help?

This is not a supported repo. This was forked from the original Platinum Weather Card with several modifications. The documentation here has also been modified in an attempt to describe the differences or to clarify the original. If you need help with the original Platinum Weather card, the best place to ask is in the Home Assistant Community. There is a thread that can be found here.

Overview

This is a fully customisable weather card with a graphical configuration. The aim is that this card is usable by people everywhere and be able to deal with your sensors no matter what integration(s) provides them. To get the most from the card you may need to look at what various weather integrations provide in addition to the standard weather entity.

The design goals for the card are:

• Totally configurable with a gui editor (no more YAML, although YAML is still supported)
• A ridiculous amount of flexibilty, as we can not possibbly guess everyone's use case

Installation

The original Platinum Weather Card supports installation using HACS. It actually discourages manual installation "Due to the complexities of the card (icons/split code for performance)". The original card also exists within the HACS Store making its installation even more convenient.

This "forked version" can also use HACS, but one needs to configure HACS for this particular forked repository.

• Go to the HACS "Front End" page and click on the upper-right 3-dots, and then click on "Custom Repositories". For "Repository", paste https://github.com/tommyjlong/platinum-weather-card , and choose Lovelace for the Category. Hit ADD.
• Back in the HACS "Front End" page, click on "+ EXPLORE AND DOWNLOAD REPOSITORIES". Then do a search for "Platinum Weather Card".
• ⚠️ THERE WILL BE TWO IDENTICAL Platinum Weather Card ENTRIES showing up. The top one is the original version that comes in the HACS store, the one below it is this "forked version". Click on the below entry.
• A page should appear showing the README and the author showing up in the upper left hand corner (make sure it shows tommyjlong otherwise this is the incorrect repository). On this page it should allow you to DOWNLOAD this card.

After installing the card you can add as many instances of the card on the dashboard as you desire.

Getting Started

You MUST have already configured a weather integration to provide data for the card to use. As with all cards they only visualise data from backend entities. There are numerous weather integrations available in both the core and HACS. You will need to find one that is best suited to your location (some countries have multiple options with varying degrees of accuracy). In this "forked version", for forecasts data, the card currently only supports the configuration of one weather integration. It is possible to use additional weather integrations for forecasts but to do so will require the use of template sensors to extract what you need.

When you first create a card it will show nothing until you go and select the entities you want to use in the GUI config, so a card that looks like this is not an error, but just needs configuring.

Most of the configuration should be reasonably obvious, but the following sections give more details. It is recommended that you at least have a read of both the 'Concepts' and 'Sections'. After that it is more of a reference for the various parts of the card if you need more information.

Concepts

The card has sections, any of these sections can be enabled/disabled and reordered to suit your individual needs. Each section has its own configuration pages for the selection of entities and to control display and styling.

It is understood that everyone's use case may be different (and you may have limited data depending on the weather integration you are using), the default settings are aimed at maintaining compatibiltiy with the old bom/custom/darksky weather card that we are aiming to deprecate. There is no reason that all of your weather data needs to be shown on a single card. This card allows you to have multiple instances with different configurations to achieve what you want.

Rather than putting everything in one gigantic card it is possible to create a few smaller cards, with each having a lot of options of disabled. For example, you could choose to put observations on one card and forecast information on another.

Sections

As mentioned above, this new card allows you to enable/disable/reorder the sections. These are the sections currently available:

• Overview
• Extended
• Slots
• Daily Forecasts

On the cards main configuration dialog, use the switch to completely remove a section if it is not required. This will result in that section taking up absolutely no space on the card. Use the up/down buttons to reorder the sections as desired. The Global Options contains settings that have an effect on multiple sections.

Overview Section

This section as the name suggests, adds an overview section to the card.

There are 4 different layout options to choose from for the overview section. There are 'complete', 'observations', 'forecast' and 'title only'.

Complete

Observations

Forecast

Title Only

The fields available to fill in will be altered based on the layout chosen.

Option name	Type	Description
Card Title Text Line 1	String	Optional text that should be displayed as the cards title
Card Title Text Line 2	String	Optional text that should be displayed as the cards title
Entity Update Time	Entity	Optionally defines the entity to use for the timestamp. The entities state MUST provide a valid timestamp in RFC 3339 format (ie. yyyy-mm-ddThh:mm:ss+offset)
Use Attribute	Boolean	If this is enabled you will then be able to choose an attribute of the above entity to use for the timestamp
Attribute	String	The attribute that contains the timestamp
Update Time Prefix	String	Optional text to include as a prefix to the timestamp
Entity Current Temperature	Entity	The entity that contains the current temperature
Entity Apparent Temperature	Entity	An optional entity that contains the apparent 'feels like' temperature
Entity Forecast Icon	Entity	The entity whose state contains the current conditions. It is used to derive the name of the icon to display. This use to be Entity Current Conditions
Entity Forecast Summary	Entity	The entity whose state contains the current condition. It is converted to a prettier state name. (Ex. partlycloudy to Partly cloudy). This use to be Entity Current Text

The various entity fields can either be a sensor that provides the value in its state, or in the case where the weather integration is being used, you can just select that weather entity and a corresponding attribute will be selected automatically.

Extended Section

A section that shows today's detailed forecast (See the figure below with the highlighted red box). To use this section you will need either a weather integration or a sensor that provides a more detailed text about today's weather forecast (Note: not all weather integrations or weather systems support this).

• If it is available with your weather entity, then in this "forked version" of the card, configure the "Entity Extended Forecast" along with the "Extended Use Attribute" set to ON (true in YAML) and set the "Extended Name Attribute" to the name of the weather entity's attribute.
• For a sensor, configure the "Entity Extended Forecast" and the state will be used as text, or optionally in addition, set the "Extended Use Attribute" to ON (true in YAML) and set the "Extended Name Attribute" to the name of the sensor entity's attribute.
• If it is not available for your weather integration the best thing to do is to disable the extended section.

The following fields are available.

Option name	Type	Description
Entity Extended Forecast	Entity	The name of the entity that contains the detailed forecast
Use Attribute	Boolean	If this is enabled you will then be able to choose an attribute of the above entity to use for the detailed forecast. In this "forked version", if a weather entity is used for the Entity Extended Forecast, then this must be set to ON/true and the Attribute must also be configured.
Attribute	String	The attribute that contains the detailed forecast. In this "forked version" if the Entity Extended Forecast is a weather entity, there is a bug in that the choices listed are not forecast attributes, however you can still configure the attribute directly (ex. detailed_description).
Entity Today's UV Forecast	String	If defined the text from this entity will be appended to the detailed forecast
Entity Today's Fire Danger	String	If defined the text from this entity will be appended to the detailed forecast

Slots Section

A section to show a set of data in 2 columns (with up to 8 rows). This section is highly configurable. As you select different options for the slots the set of entities that are needed gets dynamically updated to indicate what options should be set.

The following table describes what each slot value is intended to show. Note that what is available is very dependant on the weather integration in use.

Slot Value	Description	Display Sample
Current humidity	Shows the current humidity as a percentage	36%
Today's recorded rainfall	The amount of rain that has fallen today	5mm
Current air pressure	The current atmopheric air pressure	1018hPa
Current wind conditions	The current direction, speed and gust speed. If any element is missing it is removed from the display	SSE 9km/h (Gust 13km/h)
Current wind conditions kts	The current direction, speed and gust speed. If any element is missing it is removed from the display	SSE 5Kt (Gust 6Kt)
Current visibility	The current visibility. Most likely only available for airports	70km
Today's observed Max	The maximum temperature recorded so far today	Observed Max 19°C
Today's observed Min	The minimum temperature recorded so far today	Observed Min 4°C
Today's forecast Max	The maximum temperature recorded so far today	Observed Max 19°C
Today's forecast Min	The minimum temperature recorded so far today	Observed Min 4°C
Next temp min/max	The next chronologically occuring minimum or maximum	Overnight Min 4°C
Following temp min/max	The following chronologically occuring minimum or maximum	Tomorrow's Max 20°C
Observed/forecast max	Todays observer maximum and forecast maximums	Obs Max 19°C (Fore 19°C)
Observed/forecast min	Todays observer maximum and forecast minimums	Obs Min 4°C (Fore 5°C)
Next sun rise/set time	The time of the next chronologically occuring sunrise or sunset	7:10pm
Following sun rise/set time	The time of the following chronologically occuring sunrise or sunset	Mon 6:35am
Chance of rain	The percentage chance of rain for today	10%
Rainfall forecast	A comination of the percentage chance of rain and the estimated amount	10% - 3 to 6mm
Today's forecast rainfall	The estimated amount of rain today	Forecast 3 to 6mm
Tomorrow's forecast rainfall	The estimated amount of rain tomorrow	Fore Tom 1 to 3mm
Today's uv forecast	The forecast maximum uv level for today	UV Extreme
Today's fire danger	The forecast fire danger for today	Moderate
Custom entity 1	Create a custom entity by specifying an icon, entity and unit
Custom entity 2	Create a custom entity by specifying an icon, entity and unit
Custom entity 3	Create a custom entity by specifying an icon, entity and unit
Custom entity 4	Create a custom entity by specifying an icon, entity and unit
Blank slot	Show an empty slot
Remove slot	Remove the slot. Any slot below will move up

Daily Forecast Section

A section to show the daily forecast for a specified number of days in either a horizontal or vertical layout.

There are two posible layouts. These are configured in the Card Editor for the Daily Section "Options".

Horizontal
This is the default.

There are two configuration options available for showing the Maximum and Minimum Temperatures:

• old_daily_format (YAML mode only)
  • true will show "Maximum Temperature" on one line and underneath it the "Minimum Temperature on a second line, one over the top of the other.
  • false (default) will show "Minimum temperature" and "Maximum Temperature" on one line separated by "/".
• tempformat (YAML mode only)
  • highlow - When old_daily_format is set to false, will show the Maximum Temperature first, and then Minimum Temperature. This will be useful for forecasts have that day's mimimum lows actually occurring after midnight the following day.
  • otherwise (default) When old_daily_format is set to false, will show the Minimum Temperature first and then Maximum Temperature. This will be useful for forecasts that have that day's minimum low occuring on the same day.
    

Vertical

The following fields are available.

Option name	Type	Description
Weather Entity with Forecasts	String	In this "forked version", if a weather entity is configured anywhere to provide forecast data for this card, only a single weather entity is supported and it must be configured here. Any other configuration(s) below using a weather entity must set the configured weather entity to be the same as this one.
Forecast Type	String	In this "forked version", if a weather entity is used to provide forecast data, the forecast type must be configured and set to "daily". Options for "Hourly" and "Twice Daily" are listed but are NOT.
Entity Forecast Icon 1	String	The sensor entity whose state, or the weather entity whose forecast attribute condition contains the forecasted condition. It is used to derive the name of the icon to display.
Entity Forecast Summary 1	String	The sensor entity whose state provides the short summary text (ex. "Showers increasing."). In this "forked version", a weather entity can be also be used and its forecast attribute condition will be used for the summary text and it is converted to a prettier state name. (Ex. partlycloudy to Partly cloudy).
Entity Forecast Min 1	String	The entity that provides the forecast minimum temperature
Entity Forecast Max 1	String	The entity that provides the forecast maximum temperature
Entity Forecast Chance of Rain 1	String	The entity that provides the percentage chance of rain
Entity Forecast Possible Rain 1	String	The entity that provides the estimated amount of rain
Entity Extended Forecast 1	String	The name of the entity that contains the detailed forecast text. In this "forked version" if a weather entity is used, an attribute has to be specified.
Use Attribute	Boolean	If this is enabled you will then be able to choose an attribute of the above entity to use for the detailed forecast. In this "forked version", if a weather entity is used for the Entity Extended Forecast 1, then this must be set to ON/true and the Attribute must also be configured.
Attribute	String	The attribute that contains the detailed forecast text. In this "forked version" for a weather entity, there is a bug in that the choices listed are not forecast attributes, however you can still configure the attribute directly (ex. detailed_description).
Entity Fire Danger 1	String	The entity that provides the fire danger forecast

For these entities you can either specify a weather entity, in which case this card will use the data from the forecast's attributes (note that "detailed forecast text" and "fire danger" may not be included in your weather integration's forecast), or you can use individual template sensors and when you provide the name of the sensor for tomorrow's forecast item use a number in the name and then repeat this for the subsequent days' sensors and make sure these corresponding subsequent days' sensors have an incrementing number in their name.

Global options

This page contains options that don't neatly fit in other places (ie. they have an effect on multiple sections).

The following fields are available.

Option name	Type	Description
Show staic icons	Boolean	Turning this on disables the use of animated icons across the entire card
Time format	String	Selects whether to use the system time format or explicitly set 12 or 24 hour mode
Locale	String	Specifies a locale to pass into any conversion functions

YAML Reference

This reference is here for completeness and can be configured in the card's editor while in "SHOW CODE EDITOR" mode. Almost all settings can be configured using the GUI so in general, you should not need to refer to this. The options are split into global settings and a section for each of the sections in the card.

Global Settings

Variable	Type	Default	Description
type	String	null	Must be custom:platinum-weather-card
section_order	List	- overview - extended - slots - daily_forecast	Specifies the order in which the sections are displayed on the card
show_section_overview	Boolean	true	Specifies if the overview section is visible
show_section_extended	Boolean	true	Specifies if the extended section is visible
show_section_slots	Boolean	true	Specifies if the slots section is visible
show_section_daily_forecast	Boolean	true	Specifies if the daily_forecast section is visible
tap_action	Action	none	Specifies what action to perform when the card is tapped
hold_action	Action	none	Specifies what action to perform when the card is held
double_tap_action	Action	none	Specifies what action to perform when the card is double tapped
option_static_icons	Boolean	false	Set to true to use non-animated icons
option_time_format	String	system	Can be one of system, 12hour or 24hour
option_locale	String	none	The locale to use when formatting timestamps
text_update_time_prefix	String	none	Specifies a string to prepend to the update time

Actions

This "forked version" tweaked the original somewhat. All the Actions that are documented in Home Assistant may or may not be supported. Here are some examples showing how "Actions" can be used.

Tap Action
In this example the action more-info is used to pop up a targetted entity's "more info" card. The targetted entity has to be specified further as either entity or camera_image (You can use both but entity will take precedence).

tap_action:
  action: more-info

camera_image: camera.back_yard_camera
entity: weather.my_abc_weather

Hold Action
In this example, a hold action will navigate the user to lovelace view (a UI tab) named "MISC".

hold_action:
  action: navigate
  navigation_path: /lovelace/misc

Double Tap Action
In this example, a double-tap action will toggle on/off a specified light.

double_tap_action:
  action: call-service
  service: light.toggle
  data: {}
  target:
    entity_id: light.test_product

Overview Settings

Variable	Type	Default	Description
overview_layout	String	complete	Can be one of complete, observations, forecast or title only. Sets the layout to use for the overview section
option_show_overview_decimals	Boolean	false	Show one decimal place on current and apparent temperature
option_show_overview_separator	Boolean	false	Show separator at bottom of overview section
text_card_title	String	none	Line 1 of the cards title
text_card_title_2	String	none	Line 2 of the cards title
entity_update_time	String	none	The name of the entity that provides the update time. It uses the entity's state unless ``update_time_use_attr` is true
update_time_use_attr	Boolean	false	The name of the attribute that provides the update time
update_time_name_attr	String	none	The name of the attribute to use for the update time
entity_temperature	String	none	The name of the entity that provides the current temperature
entity_apparent_temp	String	none	The name of the entity that provides the apparent (feels like) temperature
entity_forecast_icon	String	none	The name of the entity that provides todays forecast icon
entity_summary	String	none	The name of the entity that provides the short forecast summary

Extended Section

Variable	Type	Default	Description
entity_extended	String	none	The name of the entity that provides today's extended forecast
extended_use_attr	Boolean	false	The name of the attribute that provides the extended forecast
extended_name_attr	String	none	The name of the attribute to use for the extended forecast
entity_todays_uv_forecast	String	none	The name of the entity that provides today's uv forecast to append to the extended forecast
entity_todays_fire_danger	String	none	The name of the entity that provides today's fire danger to append to the extended forecast

Slots Section

Variable	Type	Default	Description
slot_l1	Slot	forecast_max	The value to show in slot l1. See table below for more detail
slot_l2	Slot	forecast_min	The value to show in slot l2. See table below for more detail
slot_l3	Slot	wind	The value to show in slot l3. See table below for more detail
slot_l4	Slot	pressure	The value to show in slot l4. See table below for more detail
slot_l5	Slot	sun_next	The value to show in slot l5. See table below for more detail
slot_l6	Slot	remove	The value to show in slot l6. See table below for more detail
slot_l7	Slot	remove	The value to show in slot l7. See table below for more detail
slot_l8	Slot	remove	The value to show in slot l8. See table below for more detail
slot_r1	Slot	popforecast	The value to show in slot r1. See table below for more detail
slot_r2	Slot	humidity	The value to show in slot r2. See table below for more detail
slot_r3	Slot	uv_summary	The value to show in slot r3. See table below for more detail
slot_r4	Slot	fire_danger	The value to show in slot r4. See table below for more detail
slot_r5	Slot	sun_following	The value to show in slot r5. See table below for more detail
slot_r6	Slot	remove	The value to show in slot r6. See table below for more detail
slot_r7	Slot	remove	The value to show in slot r7. See table below for more detail
slot_r8	Slot	remove	The value to show in slot r8. See table below for more detail
entity_pop	String	none	Entity required for pop and popforecast
entity_pos	String	none	Entity required for popforecast and possible_today
entity_possible_tomorrow	String	none	Entity required for possible_tomorrow
entity_rainfall	String	none	Entity required for rainfall
entity_humidity	String	none	Entity required for humidity
entity_pressure	String	none	Entity required for pressure
pressure_units	String	none	Optional string for current pressure units
entity_observed_max	String	none	Entity required for observed_max and temp_maximums
entity_observed_min	String	none	Entity required for observed_min and temp_minimums
entity_forecast_max	String	none	Entity required for forecast_max and temp_maximums
entity_forecast_min	String	none	Entity required for forecast_min and temp_minimums
entity_temp_next	String	none	Entity required for temp_next
entity_temp_next_label	String	none	Entity required for temp_next
entity_temp_following	String	none	Entity required for temp_following
entity_temp_following_label	String	none	Entity required for temp_following
entity_uv_alert_summary	String	none	Entity required for uv_summary
entity_fire_danger	String	none	Entity required for fire_danger
entity_wind_bearing	String	none	Entity required for wind and wind_kt
entity_wind_speed	String	none	Entity required for wind
entity_wind_gust	String	none	Entity required for wind
entity_wind_gust_kt	String	none	Entity required for wind_kt
entity_wind_speed_kt	String	none	Entity required for wind_kt
entity_visibility	String	none	Entity required for visibility
entity_sun	String	none	Entity required for sun_next and sun_following
custom1_value	String	none	Entity required for custom1
custom1_icon	Icon	none	Name of mdi icon to use for custom1
custom1_units	String	none	Units to display for custom1
custom2_value	String	none	Entity required for custom2
custom2_icon	Icon	none	Name of mdi icon to use for custom2
custom2_units	String	none	Units to display for custom2
custom3_value	String	none	Entity required for custom3
custom3_icon	Icon	none	Name of mdi icon to use for custom3
custom3_units	String	none	Units to display for custom3
custom4_value	String	none	Entity required for custom4
custom4_icon	Icon	none	Name of mdi icon to use for custom4
custom4_units	String	none	Units to display for custom4
option_today_temperature_decimals	Boolean	false	Show one decimal place for temperature slots
option_today_rainfall_decimals	Boolean	false	Show one decimal place for rainfall slots
option_pressure_decimals	Number	0	Number of decimals to show for air pressure 0, 1, 2 or 3
option_color_fire_danger	Boolean	true	Use color attributes from fire danger if set

Slot	Description
pop	Possibility of precipitation (eg. 10%)
popforecast	Rainfall forecast (eg. 10% - 15-25mm)
possible_today	Possible rain today (eg. Forecast 15-25mm)
possible_tomorrow	Possible rain tomorrow (eg. Fore Tom 5-10mm)
rainfall	Actual rainfall today (eg. 0mm)
humidity	Current humidity (eg. 67%)
pressure	Current pressure (eg. 1018hPa)
observed_max	Todays observed maximum (eg. Observed Max 14°C)
observed_min	Todays observed minimum (eg.Observed Min 3°C)
forecast_max	Todays forecast maximum (eg. Forecast Max 19°C)
forecast_min	Todays forecast minimum (eg. Forecast Min 1°C)
temp_next	The next min or max (eg. Max 19°C)
temp_following	The following min or max (eg. Overnight Min 4°C)
temp_maximums	Both the observed and forecast maximums (eg. Obs Max 15°C (Fore 19°C))
temp_minimums	Both the observed and forecast minimums (eg. Obs Min 13°C (Fore 1°C))
uv_summary	UV forecast (eg. UV High)
fire_danger	Fire Danger (eg. CATASTROPHIC)
wind	Current wind conditions (eg. W 7 km/h (Gust 11km/h))
wind_kt	Current wind conditions (eg. W 4 Kt (Gust 6Kt))
visibility	Visibility forecast (eg. 24.1km)
sun_next	The next sunrise or sunset (eg. Mon 06:38)
sun_following	The following sunrise or sunset (eg. 19:07)
custom1	Use custom 1 fields to select behaviour
custom2	Use custom 2 fields to select behaviour
custom3	Use custom 3 fields to select behaviour
custom4	Use custom 4 fields to select behaviour
empty	Leave the slot empty, but don't remove the space
remove	Remove the slot entirely

Daily Forecast Section

Variable	Type	Default	Description
weather_entity	String		The main weather entity for all weather entity related forecasts
forecast_type	String	daily	When using the main weather entity, this specifies the forecast type. Only "Daily" is supported. In the future, options for "Hourly" and "Twice Daily" may be supported.
daily_forecast_layout	String	horizontal	Format for layout horizontal or vertical
daily_forecast_days	Number	5	Number of days to include in forecast. horizontal (1-5) vertical (1-7)
option_tooltips	Boolean	false	Show forecast tooltips on horizontal forecast
daily_extended_forecast_days	Number	7	Show extended forecast. (only for vertical forecast (1-7))
option_daily_color_fire_danger	Boolean	true	Use color attributes from fire danger if set (oly for vertical forecast)
old_daily_format	Boolean	false	If set to true, will show High Temps over the top of Low Temps
tempformat	String		If set to highlow then High temps are shown first followed by Low temps

History

This "forked version" of the Platinum Weather Card's main modification is to support Home Assistant's new 2023.9 method for obtaining Weather Forecasts as this is not supported in the original. This new method requires the front-end to subscribe to weather forecast events with the weather integration. The data received is the same data that can be found using the new service weather.get_forecasts.

The original Platinum Weather Card has been patterned after the original Dark-Sky animated weather card (https://github.com/iammexx/home-assistant-config/tree/master/ui/darksky), and a forked variant, the BOM Weather Card (https://github.com/DavidFW1960/bom-weather-card). One of its original design goals was to rovide an upgrade path from @DavidFW1960 custom-weather-card (we are working very closely to ensure this works). There has been a lot of code reused, but this card has effectively been rewritten from the ground up to make it more flexible.

Migration from the old card

Migration from the older Custom Animated Weather Card is straight forward. It is recommended that you create a new card rather so that your current cards config is preserved until you are happy with the new cards configuration.

Create a new Platinum Weather Card, switch to the Code Editor (YAML mode) and simply paste in the contents of your existing configuration, making sure to keep the new type: custom:platinum-weather-card. At this stage some elements may not appear correctly. Save the card and then edit it again (the editor updates the configuration when opened if it detects an older config and performs some update tasks) and then save it once more.

If there are still items that don't look correct you will need to manually adjust those to suit.