Pinned Repositories
BIGTREETECH-TFT35-V3.0
TFT35 V3.0 is a medium size, dual-mode, ultra-clear 3D printer display and it is designed by Bigtree Technology co.,LTD. It is an excellent replacement for the standard 12864 LCD displays.
BIGTREETECH-TMC2130-V1.1
Configuration: CFG/SPI microsteps: Up to 1/256 microPlyer: 1/256 Logic Voltage VI0: 3-5V Motor Voltage : 5.5-46V Motor Phase Current: 1.2A RMS, 2.5A Peak
BIGTREETECH-TouchScreenFirmware
support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1, TFT43, TFT50, TFT70
Configurations
Configurations for Marlin Firmware
LCD_GRBL
Offline controller for CNC with GRBL 1.1
LilyGO-T-SIM7000G
LilyGO T-SIM7000G
Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
SKR-2
Wordclock
Diy Wordclock with an esp32 and ws2812b Leds
tommyvhb's Repositories
tommyvhb/BIGTREETECH-TFT35-V3.0
TFT35 V3.0 is a medium size, dual-mode, ultra-clear 3D printer display and it is designed by Bigtree Technology co.,LTD. It is an excellent replacement for the standard 12864 LCD displays.
tommyvhb/BIGTREETECH-TMC2130-V1.1
Configuration: CFG/SPI microsteps: Up to 1/256 microPlyer: 1/256 Logic Voltage VI0: 3-5V Motor Voltage : 5.5-46V Motor Phase Current: 1.2A RMS, 2.5A Peak
tommyvhb/BIGTREETECH-TouchScreenFirmware
support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1, TFT43, TFT50, TFT70
tommyvhb/Configurations
Configurations for Marlin Firmware
tommyvhb/LCD_GRBL
Offline controller for CNC with GRBL 1.1
tommyvhb/LilyGO-T-SIM7000G
LilyGO T-SIM7000G
tommyvhb/Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
tommyvhb/SKR-2
tommyvhb/Wordclock
Diy Wordclock with an esp32 and ws2812b Leds