Waiting for drive to deploy...
Closed this issue · 10 comments
normausome commented
Hey guys!
I am having an issue with it being stuck at "Waiting for drive to deploy" when I run "make cheapino:default:flash"
. not sure why this would be happening. I see the rp2040 being listed when I run "lsusb".
Thanks!
tompi commented
Hey!
Did you power on the rp2040 while holding down the boot button?
Or hold boot and press reset
…On Fri, 10 Nov 2023 at 22:59, normausome ***@***.***> wrote:
Hey guys!
I am having an issue with it being stuck at "Waiting for drive to deploy"
when I run "make cheapino:default:flash". not sure why this would be
happening. I see the rp2040 being listed when I run "lsusb".
Thanks!
—
Reply to this email directly, view it on GitHub
<#11>, or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AABYSJIH347PJR6KDNRIXXTYD2PTBAVCNFSM6AAAAAA7GX5MCOVHI2DSMVQWIX3LMV43ASLTON2WKOZRHE4DQNBWGU2TANY>
.
You are receiving this because you are subscribed to this thread.Message
ID: ***@***.***>
tompi commented
It should show up as a usb drive if you manage to put it in dfu mode
On Fri, 10 Nov 2023 at 23:14, Thomas Haukland ***@***.***>
wrote:
… Hey!
Did you power on the rp2040 while holding down the boot button?
Or hold boot and press reset
On Fri, 10 Nov 2023 at 22:59, normausome ***@***.***> wrote:
> Hey guys!
>
> I am having an issue with it being stuck at "Waiting for drive to deploy"
> when I run "make cheapino:default:flash". not sure why this would be
> happening. I see the rp2040 being listed when I run "lsusb".
>
> Thanks!
>
> —
> Reply to this email directly, view it on GitHub
> <#11>, or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AABYSJIH347PJR6KDNRIXXTYD2PTBAVCNFSM6AAAAAA7GX5MCOVHI2DSMVQWIX3LMV43ASLTON2WKOZRHE4DQNBWGU2TANY>
> .
> You are receiving this because you are subscribed to this thread.Message
> ID: ***@***.***>
>
normausome commented
normausome commented
would i have to flash it with the RJ45 plugged in? could also be my soldering that is messed up
tompi commented
No, shouldnt have to do that…
So no keys Are working?
Did you test the miryoku uf2 file?
If neither Are working, maybe post some pics of the board, might be some hw
trouble?
…On Sat, 11 Nov 2023 at 03:54, normausome ***@***.***> wrote:
would i have to flash it with the RJ45 plugged in?
—
Reply to this email directly, view it on GitHub
<#11 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AABYSJIZ72DLSCDX7N2ZLQDYD3SGNAVCNFSM6AAAAAA7GX5MCOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBWGY2DMMRRG4>
.
You are receiving this because you commented.Message ID:
***@***.***>
normausome commented
yes, no keys are working. i need to get a multimeter to test the connection to the keys....
tompi commented
Send some good resolution pictures of the board. Might be able to spot
problem by visual inspection
…On Sat, 11 Nov 2023 at 15:03, normausome ***@***.***> wrote:
yes, no keys are working. i need to get a multimeter to test the
connection to the keys....
—
Reply to this email directly, view it on GitHub
<#11 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AABYSJNANBMFMZWELM7ANNTYD6ASRAVCNFSM6AAAAAA7GX5MCOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBWHAZDKNBTGA>
.
You are receiving this because you commented.Message ID:
***@***.***>
normausome commented
got it! so left side works, but right side doesn't - just had to resolder some of the diodes correctly. sorry this is my first time!
time to figure out what is wrong with the right side.
tompi commented
Try another rj45 cable and if it doesnt help, post close ups
…On Sat, 11 Nov 2023 at 16:44, normausome ***@***.***> wrote:
got it! so left side works, but right side doesn't - just had to resolder
some of the diodes correctly. sorry this is my first time!
time to figure out what is wrong with the right side.
—
Reply to this email directly, view it on GitHub
<#11 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AABYSJMEIEDK2JKXNVAXO4LYD6MORAVCNFSM6AAAAAA7GX5MCOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBWHA2DQMZSGU>
.
You are receiving this because you commented.Message ID:
***@***.***>
normausome commented
ok so what i did was desolder switches and try it out on a new board! thanks for the help!!