cubecell
There are 17 repositories under cubecell topic.
HelTecAutomation/CubeCell-Arduino
Heltec CubeCell Series (based on ASR6501, ASR6502 chip) Arduino support.
tuxphone/CubeCellRepeater
Small repeater node for the meshtastic project.
HelTecAutomation/platform-asrmicro650x
ASR Microelectronics ASR650x: development platform for PlatformIO
McOrts/MeteoEstacionLoRa
Estación metereológica DIY con comunicaciones LoRaWAN TTN
lyusupov/Ebyte-E78-breakout-PCB
PCB design of breakout board for Ebyte E78 (ASR6501 or ASR6601) module
dj1an/Cubecell_LoRa_APRS_Tracker
LoRa APRS Tracker for Heltec Cubecell GPS Boards
vhuynen/CubeCell-AB01-LoRaWAN-Helium-Mailbox-Notifier
It's an IoT DIY project which notifies you when you have received a parcel or a letter in your letterbox. This project uses an HelTec AB01 LoRaWAN module to send data over an LoRaWAN Gateway when WiFi is out of range. I use an Helium Gateway from the People's Network in order to forward packets over Helium Network which send data to AWS IoT Core (MQTT) or Pipedream (HTTP) and more. LoRaWAN is a bidirectional protocol useful when you need to send few data over long distance from low-power and low-bandwidth IoT.
vhuynen/CubeCell-AB01-LoRaWAN-Helium-Rain-Gauge
This DIY project is a LoRaWAN Rain Gauge based on CubeCell HTCC AB01 development Board.
dmoibm/LoRaWan_BME280_THP
Heltec CubeCell mit BME280
LoRaWahnsinn/LoRaKastl
A physical mailbox that sends you a message via LoRaWAN once you receive a letter.
MediaLabUniovi/IOT_AirQuality_Drone
LoRa mini air quality drone onboard station
tomuelle/DIYweatherstation
This page includes all information and codes to developp both a simple datalogger or a more complex LoRaWAN weather station based on a low-cost arduino-based approach
ArzeCarlos/Project3
Project III- Univalle 2023 LoRa-IoT platform
Salaml/sensor-networks
presentation, report and code for module sensor networks of HTW Dresden (I771)
lago4l/cubecell
Configuración básica de dos dispositivos CubeCell HTCC-AB02 para comunicarse entre ellos mediante LoRa.
lago4l/cubecell-dht22
Configuración básica para conectar un sensor DHT22 a un CubeCell HTCC-AB02 y enviar sus datos a otro CubeCell HTCC-AB02 mediante LoRa.