cy8ckit-062-ble
There are 77 repositories under cy8ckit-062-ble topic.
Infineon/mtb-example-mcuboot-basic
This example demonstrates building a bootlaoder application for PSoC 6 using MCUboot, an open source secure bootloader for 32-bit MCUs. This bootloader app runs on CM0+.
Infineon/mtb-example-btstack-freertos-hello-sensor
This code example demonstrates the implementation of the Bluetooth® LE vendor-specific device using AIROC™ CYW20829, PSoC™ 6, Wi-Fi & Bluetooth® combo chips and ModusToolbox™ software environment.
Infineon/mtb-example-hal-hello-world
Demonstrates simple UART communication by printing a "Hello World" message on a terminal and blinks an LED using a Timer resource.
Infineon/mtb-example-hal-uart-transmit-receive
This example demonstrates the UART (HAL) transmit and receive operation in PSoC 6 MCU.
Infineon/mtb-example-btstack-freertos-battery-server
This code example demonstrates the implementation of a simple Bluetooth LE Battery Service. The Battery Service exposes the Battery Level of the device and comes with support for OTA update over Bluetooth LE.
Infineon/mtb-example-psoc6-ble-findme
This code example demonstrates the implementation of a simple Bluetooth LE Immediate Alert Service (IAS)-based Find Me Profile (FMP) using PSoC 6 MCU with Bluetooth Low Energy Connectivity.
Infineon/mtb-example-btstack-freertos-cts-server
This code example demonstrates the implementation of a simple BLE GAP Central - GATT Server with Current Time Service using the Cypress Combo (Wi-Fi+BT) SoCs.
Infineon/mtb-example-btstack-freertos-ess
This code example demonstrates the implementation of a simple BLE Environmental Sensing Profile.
Infineon/mtb-example-psoc6-crypto-aes
This code example encrypts and decrypts user input data using the AES algorithm using a 128-bit key. The encrypted and decrypted data are displayed on a UART terminal emulator.
Infineon/mtb-example-psoc6-emwin-tft-freertos
This example demonstrates displaying 2D graphics on a TFT display using the emWin graphics library and the AppWizard GUI design tool in FreeRTOS.
Infineon/mtb-example-psoc6-i2s
This example demonstrates how to use the I2S hardware block in PSoC 6 MCU to interface with an audio codec.
Infineon/mtb-example-psoc6-qspi-xip
This example demonstrates how to use QSPI in execute-in-place (XIP) mode with external flash memory on the PSoC 6 MCU using ModusToolbox IDE.
Infineon/mtb-example-btstack-freertos-battery-client
This code example demonstrates the implementation of the Bluetooth® LE Battery Service Client using the AIROC™ CYW20829 Bluetooth® chip and ModusToolbox™ software environment.
Infineon/mtb-example-btstack-freertos-throughput-client
This code example demonstrates the maximum throughput (using GATT layer notification and GATT write command) that can be achieved with Infineon® PSoC™ 6 MCU with AIROC™ Bluetooth® LE, AIROC™ CYW20829.
Infineon/mtb-example-empty-app
This empty application provides a template for creating applications using PSoC 6 devices.
Infineon/mtb-example-hal-crypto-trng
This code example demonstrates generating a One-Time Password (OTP) using the True Random Number generation (TRNG) feature of PSoC 6 MCU cryptography block.
Infineon/mtb-example-psoc6-capsense-cm0p
This code example demonstrates how to create a CAPSENSE™ design using CM0 of PSoC™ 6 MCU, without utilizing CM4. This code example features CAPSENSE™ buttons, button 0 turns the LED ON and button 1 turns the LED OFF. This project uses the CAPSENSE™ Middleware Library.
Infineon/mtb-example-psoc6-capsense-custom-scan
This code example demonstrates CapSense® Component’s custom scanning through callback functions that allow altering the sensor parameters during run-time or synchronizing the CapSense scan with non-CapSense operations.
Infineon/mtb-example-psoc6-dual-cpu-ipc-pipes
This example demonstrates how to use the inter-processor communication (IPC) driver to implement a message pipe in PSoC 6 MCU. The pipe is used to send messages between CPUs.
Infineon/mtb-example-psoc6-dual-cpu-ipc-sema
This example demonstrates how to use the inter-processor communication (IPC) driver to implement a semaphore in PSoC 6 MCU. The semaphore is used to lock to control access to a resource shared by the CPUs and synchronize the initialization instructions.
Infineon/mtb-example-psoc6-emwin-eink-freertos
This code example demonstrates displaying 2D graphics on an E-Ink display using EmWin graphics library.
Infineon/mtb-example-psoc6-filesystem-littlefs-freertos
This code example shows how to implement a littlefs file system for PSoC 6 devices using the mtb-littlefs MW library. The CE supports working with both SD card and QSPI NOR flash devices.
Infineon/mtb-example-psoc6-security
This is a minimal starter dual-CPU security application template for PSoC™ 62/63 MCU devices. This code example is meant to be a companion to the AN221111 – PSoC™ 6 MCU: Designing a secured system application note. It demonstrates the following features to create a secured system as explained in the application note.
Infineon/mtb-example-psoc6-smartio-sgpio-target
This example uses a SPI resource and Smart I/O in PSoC 6 MCU to implement the Serial General Purpose Input/Output (SGPIO) Target interface, which is a four-signal bus defined in the SFF-8485 standard. Another SPI resource is used to implement the SGPIO Initiator, which drives the clock on the SGPIO bus.
Infineon/mtb-example-psoc6-spi-master-dma
This example demonstrates the use of SPI SCB (Serial Communication Block) resource for PSoC® 6 MCU in Master mode using DMA.
Infineon/mtb-example-psoc6-uart-transmit-receive-dma
This example demonstrates the UART transmit and receive operation using DMA in PSoC 6 MCU.
Infineon/cce-mtb-psoc6-tcpwm-interrupt
Periodic interrupt generation using timer counter PWM (TCPWM) in continuous up counter mode.
Infineon/mtb-example-btstack-freertos-throughput-server
This code example demonstrates the maximum throughput (using GATT layer notification and GATT write command) that can be achieved with Infineon® PSoC™ 6 MCU with AIROC™ Bluetooth® LE, AIROC™ CYW20829, and AIROC™ Wi-Fi & Bluetooth® combo SoC devices.
Infineon/mtb-example-hal-i2c-slave
This code example demonstrates the use of the I2C resource in HAL in slave mode. The I2C slave is configured to receive command packets to control a user LED on the kit.
Infineon/mtb-example-hal-posix-freertos
mtb-example-hal-posix-freertos
Infineon/mtb-example-hal-rtc-periodic-wakeup
mtb-example-hal-rtc-periodic-wakeup
Infineon/mtb-example-lvgl-demo
This code example demonstrates displaying 2D graphics demo on a TFT display using the Light and Versatile Graphics Library. The 2D graphics displays a music player application which is listed as one of the standard demo in the LVGL page.
Infineon/mtb-example-psoc6-freertos-bluetooth-ui-demo
mtb-example-psoc6-freertos-bluetooth-ui-demo
Infineon/mtb-example-psoc6-freertos-bt-sensorhub
This example demonstrates multiple sensors (motion sensor and thermistor) interfaced with PSOC6BLE. there is a motion sensor example using BMI160 for PSoC6BLE that could be used and add Bluetooth connectivity