energia
There are 79 repositories under energia topic.
toniebox-reverse-engineering/hackiebox_cfw
Custom firmware for the Toniebox based on the CC3200
nikito7/easyhan
Easy HAN ® RS485
Andy4495/TI_Platform_Cores_For_Arduino
Replace Energia with Arduino. Use the Arduino IDE or CLI with Texas Instruments processors in the MSP430, MSP432, and Tiva families using the Arduino Boards Manager.
abhra0897/msp430_cc1101_energia_v2
This is the version 2 of my previous CC1101 driver library for MSP430 (https://github.com/abhra0897/MSP430-CC1101-Energia-Library). This time it is much better, with lots of new features, supporting all the frequencies, and works perfectly. Read the readme.md for detailed information.
sq7bti/iAccelStepper
interrupt driven stepper controller inherited from AccelStepper
Andy4495/TLC591x
Library for Texas Instruments TLC5916 and TLC5917 constant current LED sink driver for Arduino.
jscrane/r65emu
Arduino emulation library for 8-bit microcomputers based on 6502, i8080 or z80
jscrane/Apple1
Apple-1 Emulator for Stellarpad, ESP8266 and ESP32
jscrane/uC-Makefile
Makefile for Microcontrollers
Andy4495/SWI2C
Software I2C interface library. Does not use any platform-specific code, and has a much simpler API than standard Wire library.
jscrane/PET
Commodore PET Emulator on Stellarpad, ESP8266 and ESP32
Andy4495/ICM7218
Library to interface with Intersil/Renesas and Maxim ICM7218 and Intersil/Renesas ICM7228 LED driver chips. Compatible with Arduino and Energia.
jscrane/UTFT-Energia
Energia and ESP32 port of Henning Karlsen's UTFT library
Andy4495/NewhavenOLED
Library for Newhaven OLED displays using US2066 controller chip. Bit-bang SPI implementation allows selection of any Arduino or MSP430 I/O pins to control the display.
Andy4495/BQ27441_SWI2C
This library interfaces with the Texas Instruments BQ27441 Battery Fuel Gauge using software I2C. This allows the device to be connected to any two available I/O pins instead of the hardware-specific I2C peripheral pins.
Andy4495/Kentec_35_Parallel
Library to support the Kentec EB-LM4F120-L35 3.5" QVGA TFT LCD BoosterPack with Parallel I/O.
Andy4495/matrix-keypad-library
Simple-to-use matrix keypad library.
Andy4495/MSP430TempSensorWithDisplay
Wireless temperature sensor which uses an MSP-EXP430FR2433 LaunchPad, 430BOOST-CC110L wireless transceiver, BOOSTXL-BATTPACK LiPo power source, and 430BOOST-SHARP96 low-power display.
Andy4495/Outdoor-Weather-Sensor
Outdoor wireless weather sensor based on TI MSP-EXP430G2 LaunchPad, SENSORHUB BoosterPack and CC110L BoosterPack. Optimized for low-power operation, 2xAA cells should be able to power the device for well over a year.
IndianTinker/FM430
A 'digital' FM Radio built using TEA5767 and MSP430 !
M4RC0Sx/esiosapy
Unofficial ESIOS API Python library. Up to date and fully equipped.
ndroid/msp432-core
TI MSP432P4xx core for Arduino
Andy4495/EEPROM_24C08_SWI2C
Library to interface with the 24C08 external I2C 8Kx1 EEPROM using a software I2C implementation, and can therefore use any 2 I/O pins for interfacing with the EEPROM.
Andy4495/ParallelEEPROM
Parallel EEPROM programmer library. The library currently supports 32Kx8 (28C256 and X28256) and 2Kx8 (28C16) EEPROMs. Other sizes may be supported in the future.
neilkatahira/EE-Emerge-2020-Loopmaster
EE-Emerge LoopMaster 2019-2020
paulolima789/EnergiaSolar
1° site para um trabalho "APS"
vrufine/hsp-brasil
Biblioteca de índices solarimétricos medidos no território brasileiro.
z3q/airmon
Simple air quality monitor with CO2, temperature and humidity sensors. Based on MSP430 + Energia
crgfilho15/my-energy
Este projeto foi criado com o objetivo de ajudar as pessoas a simularem o custo da conta de energia elétrica em suas casas.
crgfilho15/my-energy-react-ts
Este projeto foi criado com o objetivo de ajudar as pessoas a simularem o custo da conta de energia elétrica em suas casas.
ocristopfer/calculadora-energetica
Um simples project em react que caucula a fatura da conta da ligth
taubedonner/pca95xx
Basic abstraction for TI I2C 8-bit registers that works on Arduino and Energia platforms.
taubedonner/ttp229b-arduino
Excellent library for TTP229 adapted to work in Energia (works on Arduino too)