iaq
There are 29 repositories under iaq topic.
maarten-pennings/CCS811
Arduino library for the CCS811 gas sensor for monitoring indoor air quality.
alexh-name/bsec_bme680_linux
Read the BME680 sensor with the BSEC library on Linux (e.g. Raspberry Pi)
HomeKidd/ESP8266-HomeKit-Air-Quality-Sensor-Elgato-Eve-Room
ESP8266 based Homekit Indoor Air Quality sensor that acts like Eve Room🌱
Zanduino/BME680
Arduino Library to access the Bosch BME680 - temperature, pressure, humidity and gas sensor
maarten-pennings/iAQcore
Arduino library for the iAQ-core indoor air quality sensor module with I2C interface
alexh-name/bme680_outputs
This script checks a CSV of BSEC data from the BME680 sensor periodically for some significant change and gives feedback in form of a sentence, which can be useful for automatic notifications.
thomas-riccardi/micropython-esp8266-bsec-bme680
C Module for Micropython to use BSEC binary library with BME680 sensor on ESP8266 board
elixir-sensors/sgp40
Use Sensirion SGP40 air quality sensor in Elixir
intelligent-environments-lab/bevo_iaq
BEVO Beacon with more robust air quality monitoring
CedarGroveStudios/CircuitPython_AirQualityTools
A collection of CircuitPython helpers used for the calculation of PM2.5 and CO2 air quality levels.
GrzegorzBis/BME680_Indoor_Air_Quality_Sensor
BME680 Indoor Air Quality Network Sensor
juergs/BME680-Arduino-Library-with_TVOC-
Library with TVOC output
3KUdelta/heltec_wifi_kit_32_BME680
BME680 IAQ on a Heltec Wifi-Kit32
alesimattia/Weather-Station-IN_OUT-Esp32-WiFi-IAQ
A very complete ambient-monitoring weather-station with LCD display, external probe, Internet forecast and a web dashboard.
brunacordeiro/Air-pure
Air-pure is an IoT-Based Indoor Air Quality Monitoring System. This proposal has as main objective to provide information, such as the concentration of CO2 and Total Volatile Organic Compounds (TVOC), Relative Humidity and Temperature.
fardog/anton
Particulate matter sensor -> InfluxDB on an ESP8266 or ESP32
gilbertclements/New_EIR_UVC
CSUS Senior Design Project 2021 Team members: Gil Clements | Aaron Costello | Alex Garcia | Max Repko | Richard Torres
HomeKidd/ams-iaq-core-c
Library for AMS iAQ Core C Air quality sensor using esp-open-rtos
kujiranodanna/IOT-House
IOT-House for Raspberry Pi
AndreasExner/ioBroker-IoT-IndoorAirSensor
This sketch uses three independent sensors to measure the indoor climate and air quality with a high level of precision. The data will be sent to iobroker for further processing and visualization.
mrToddman/UVGI-In-Duct-UV-C-Calculator
UVGI Calculator in Matlab. Matlab with symbolic toolbox plug-in required to run. Calculates UV dose, log and percent reduction of biological effluents flowing in water or air across UVGI lamp array. Square duct or round tube.
avsa242/sgp30-spin
Parallax P8X32A/Propeller driver object for the Sensirion SGP30 Indoor Air Quality sensor
dibartneck/air_quality_monitor
Air Quality Monitor with IAQ and CO2 sensor
intelligent-environments-lab/bleed-orange-measure-iaq
Data and analysis relateted to the Bleed Orange, Measure IAQ campaign at the University of Texas at Austin
wsular/2015-iaqcc-home-daq
Details on the whole-house air quality monitoring system used during the Indoor Air Quality & Climate Change study (2015-2018)
wsular/rpi-python-iaq-sensor
Low-cost wireless sensor node for environmental data (CO2, T, RH, P) used during the Indoor Air Quality & Climate Change study (2015-2018)