HomeKidd/ESP8266-HomeKit-Air-Quality-Sensor-Elgato-Eve-Room

Issues

• IR Remote V1.3.1

  #24 opened 5 months ago by zsoltturcsan
  3

• Burn bin to anything else then esp8266

  #22 opened 2 years ago by pcace
  0

• Дисплей

  #23 opened 2 years ago by Alexanderloba
  0

• Only working with all sensors and display installed?

  #21 opened 3 years ago by macSE1990
  1

• 2.10 and 2.11 detect Hardware revision 1.0.0 instead of 2.0.0 for new USB-C PCB | Display failed too

  #19 opened 3 years ago by jonalbr
  2

• 3D printable case

  #20 opened 3 years ago by grapefruit-thing
  0

• PCB V2.XX

  #18 opened 3 years ago by Vlr2021
  7

• MH-Z19B and BME280

  #17 opened 3 years ago by PvdGulik
  0

• 2.1.0 not working when 2.0.2 is

  #16 opened 3 years ago by wachl
  12

• Powering PCB other than micro USB

  #14 opened 3 years ago by jonalbr
  2

• VOC density as value?

  #15 opened 3 years ago by jonalbr
  3

• Used 5V adapter instead 3,3V. Do you know if only the ESP is destroyed?

  #13 opened 3 years ago by jonalbr
  7

• Serial | USB TTL adapter

  #12 opened 4 years ago by jonalbr
  4

• Can you post some pictures of the PCB after you put all the pieces on the board?

  #11 opened 4 years ago by jonalbr
  1

• Sensor range: differences between Data Sheet and Wiki

  #10 opened 4 years ago by jonalbr
  1

• wemos d1 mini and wemos shields

  #9 opened 4 years ago by sorriso93
  4

• After one use, doesn't work anymore plus screen not showing anything

  #8 opened 4 years ago by YorkWell
  11

• support

  #7 opened 4 years ago by Tao173
  4

• Firmware Version

  #5 opened 4 years ago by duxhomines
  1

• Awesome

  #3 opened 5 years ago by AchimPieters
  1

• About PCB

  #4 opened 5 years ago by vvlang
  2

• How to show the AirQuality stars?

  #2 opened 5 years ago by tobekas
  4

• Source Code available?

  #1 opened 5 years ago by jubudu
  2