kit-xmc72-evk

Infineon/mtb-example-hal-crypto-trng

This code example demonstrates generating a One-Time Password (OTP) using the True Random Number generation (TRNG) feature of PSoC 6 MCU cryptography block.

Infineon/mtb-example-pdl-xmc7000-canfd

This code example demonstrates how to use controller area network flexible data-rate (CAN FD) in XMC7000 MCU devices.

Infineon/mtb-example-wifi-secure-tcp-client

This code example demonstrates implementing a secure TCP client using the AnyCloud SDK for PSoC 6 MCU and CYW43xxx connectivity devices.

Infineon/mtb-example-wlan-offloads

This code example demonstrates the TCP Keepalive Offload functionality offered by Cypress Wi-Fi devices using PSoC® 6 MCU. It employs the AnyCloud Low Power Assistant (LPA) middleware library which helps in developing low power wireless applications for the Cypress devices.

Infineon/mtb-example-xmc7000-multicore-ipc-pipes

This example demonstrates how to use the inter-processor communication (IPC) driver to implement a message pipe in XMC7000 MCU. This example contains how to use the IPC low level I/F. The low level I/F directly controls the IPC.

Infineon/mtb-example-ethernet-secure-tcp-client

This code example demonstrates the implementation of a secure TCP client with XMC7000.

Infineon/mtb-example-ethernet-secure-tcp-server

This code example demonstrates the implementation of a secure TCP server with XMC7000.

Infineon/mtb-example-ethernet-tcp-client

This code example demonstrates the implementation of a TCP client with XMC7000 MCU.

Infineon/mtb-example-ethernet-tcp-server

This code example demonstrates the implementation of a TCP server with XMC7000.

Infineon/mtb-example-ethernet-udp-client

This code example demonstrates the implementation of a UDP client with XMC7000.

Infineon/mtb-example-ethernet-udp-server

This code example demonstrates the implementation of a UDP server with XMC7000.

Infineon/mtb-example-hal-code-flash-sector-data-updating

This code example demonstrates the use of the Flash HAL driver to perform code flash Read/Write/Erase basic operate and update sector data online.

Infineon/mtb-example-hal-posix-freertos

mtb-example-hal-posix-freertos

Infineon/mtb-example-hal-qspi-readwrite

This example demonstrates interfacing with an external NOR flash memory in Quad SPI (QSPI) mode using the serial memory interface (SMIF) in Infineon MCU.

Infineon/mtb-example-hal-tcpwm-dt

This code example shows TCPWM dead-time mode function. PWM line and PWM COMPL pins output the 1-kHz frequency wave and 1-kHz frequency wave with PWM leftalign 250 us in PWM dead-time mode

Infineon/mtb-example-hal-tcpwm-timer

This code example generates an interrupt every second with the TIMER driver, and toggles the user LED when a timer interrupt is generated.

Infineon/mtb-example-pdl-xmc7000-crypto-aes

This code example encrypts and decrypts user input data using the AES algorithm with a 128-bit key.

Infineon/mtb-example-pdl-xmc7000-crypto-sha

This code example shows how to generate a 32-byte hash value or message digest for an arbitrary user input message with the SHA-2 algorithm using the Cryptographic hardware block in the MCU.

Infineon/mtb-example-pdl-xmc7000-evtgen-active-trigger-adc

This code example demonstrates how to use the XMC7000 MCU event generator (EVTGEN) resource to trigger ADC conversion in active power mode.

Infineon/mtb-example-pdl-xmc7000-fault-handling

This example demonstrates the fault handling functionality of XMC7200 evaluation kit.

Infineon/mtb-example-pdl-xmc7000-gpio-pins

This example demonstrates the GPIO pin operation on the XMC7000 MCU, using Eclipse IDE for ModusToolbox™.

Infineon/mtb-example-pdl-xmc7000-lvd-interrupt

This code example shows how to configure low-voltage detection (LVD) in XMC7000 MCU to monitor VDDD and generate an interrupt when VDDD drops below the configured threshold.

Infineon/mtb-example-pdl-xmc7000-pwm-dual-compare-capture

This code example demonstrates the generation of asymmetric PWM signals using two compare/capture registers available in the TCPWM block of XMC7000 MCU devices.

Infineon/mtb-example-pdl-xmc7000-smartio-gpio

This example uses the smart I/O peripheral in XMC7000 MCU to connect the button input pin to an output pin to toggle an external LED.

Infineon/mtb-example-pdl-xmc7000-spi-master-dma

This example demonstrates the use of the SPI serial communication block (SCB) resource for Infineon MCU in master and slave mode using DMA.

Infineon/mtb-example-pdl-xmc7000-systick-led

This code example demonstrates how to use the SysTick timer to generate a timer interrupt on xmc7000 MCU.

Infineon/mtb-example-pdl-xmc7000-tcpwm-counter

This code example demonstrates how to use the tcpwm counter on the XMC7000 MCU.

Infineon/mtb-example-pdl-xmc7000-uart-transmit-receive-dma

This code example demonstrates the UART transmit and receive operation in XMC7000 using DMA.

Infineon/mtb-example-wifi-https-client

This code example demonstrates the implementation of an HTTPS server with PSoC™ 6 MCU and AIROC™ CYW43xxx Wi-Fi & Bluetooth® combo chips.

Infineon/mtb-example-xmc7000-blinky-freertos

This code example demonstrates the blinking LED functionality implemented by FreeRTOS tasks on the XMC7000 MCU devices.

Infineon/mtb-example-xmc7000-emulated-eeprom

This example uses the Arm® Cortex®-M7 (CM7_0) CPU of the XMC7000 MCU to execute two tasks: UART communication and emulate EEPROM behavior in flash memory.

Infineon/mtb-example-xmc7000-low-power-wakeup-from-rtc-alarm

This code example demonstrates how to enter the DeepSleep and Hibernate mode, and wakeup using the RTC alarm.

Infineon/mtb-example-xmc7000-oob-demo

This example is the out-of-the-box (OOB) demo project for the KIT_XMC72_EVK XMC7200 evaluation kit.

Infineon/mtb-example-xmc7000-otw-firmware-upgrade

Infineon/mtb-example-xmc7000-switching-power-modes

This example demonstrates how to transition XMC7000 MCU to the Active, Sleep, DeepSleep, and Hibernate power states, and how to wake up and return to Active state.