load-cell
There are 53 repositories under load-cell topic.
sparkfun/HX711-Load-Cell-Amplifier
A breakout board for the HX711 load cell weight measuring amplifier
sparkfun/OpenScale
An open source board for load cell reading and configuration based on the HX711 and ATmega328.
endail/hx711-pico-c
Implementation of single and multiple HX711 use via RP2040's state machine
yasir-shahzad/CS5530_ADC_Arduino_Library
CS5530 Weight scale sensor
endail/hx711
Raspberry Pi HX711 C++ Library
yasir-shahzad/NAU7802
A linux library to interface with load cells using NAU7802.
OddgitHub/Critical-Force
Software to measure climbing specific finger strength measures, such as Critical Force.
yasir-shahzad/HX711
A Raspberry Pi Library to interface Avia Semiconductor HX711 24-Bit Analog-to-Digital Converter (ADC) for Weight Scales
sparkfun/SparkFun_Qwiic_Scale_NAU7802_Arduino_Library
An Arduino library to interface with load cells using the Qwiic interface and the NAU7802.
yasir-shahzad/CS1237-24-Bit-ADC-Module
CS1237 24-Bit ADC Module Onboard TL431 External Reference Chip Single-Channel Weighing Sensing 24bit CS1238 Dual Channel
endail/pico-scale
A scale API for a Raspberry Pi Pico (RP2040) using the hx711-pico-c library.
kesyog/hangman
A Bluetooth-enabled strength testing and training tool that scales
yasir-shahzad/CS1238-24-Bit-ADC-Module
CS1238 24-Bit Dual Channel ADC Module Onboard TL431 External Reference Chip
endail/hx711-pico-mpy
MicroPython implementation of HX711 use via RP2040's state machine
endail/hx711-rpi-py
Python bindings for Raspberry Pi HX711 C++ Library
sparkfun/Load_Sensor_Combinator
A PCB to combine four individual strain gauges or load sensors into the standard wheat bridge configuration and 4-color wiring found on load cells.
GatCode/ScaleStabilizer
A library to stabilize load cell readings
mplogas/SmartMass
Making every Gram count!
Poduzov/HX711-Pi4j
HX711 Load cell Raspberry Pi Java class for Pi4j
mrheltic/Bilancia-SaT
Scale with a strain gauge and an HX711, 3d printed and calibrated
Scottapotamas/triaxial-loadcell-breakout
Breakout board to sample 3-axis load cells with I2C interface
sparkfun/Qwiic_Scale
An I2C based interface to load cells and other wheatstone based strain gauges.
BlueMoon73/SciolyDetectorBuilding2023
Design for the science olympiad detector building device (2022-2023 season)
Flexsidee/weight-monitoring-system
Web based weight monitoring system using esp8266.
Solla/IMADA_LoadCell_3rdPartyApplication
A 3rd party software for IMADA Load Cells. Capable of recording force 2000Hz with a protocol for time-synchronization.
luni64/TeensyLoadcell
Library to readout standard loadcells with the internal ADC/PGA of the Teensy 3.2
SimonWaldherr/hx711go
Golang package to interface hx711 load cell amplifier
billypilgrim22/DeepWeight
DeepWeight automates the manual billing process by using a load cell to measure weight, USB camera to capture image, predict fruit type using a deep learning model and printer to print a receipt.
ElTopollillo1990/openScaleProject
Weight scale using Sparkfun's OpenScale
H3wastooshort/sweets_box
a box that screams at you when taking to many sweets
Romes8/powder_dispenser
Powder-dispenser. School project 2020 - third semester
talhatallat/Weight-Measurement-System
A load cell measures the weight using strain gauges. The difference between the length of the load cell at one side of the cell will help in determining the weight that is applied to it. This will change the output impedance. The output impedance is integrated into a Wheatstone bridge where the difference of the output impedance determines and controls the output voltage of the circuit.
TSBrownie/Arduino-Wemos-D1-Seismometer-Load-Cell-v1.0
Arduino Wemos D1 basic seismometer. Creates SD card file, opens, writes, prints out. Tested with 64GB SD. Takes reading when values above / below set limits. XFW-HX711 Load Cell A2D. RTC DS1307. WeMos Micro SD Shield. IDE Info = WeMos D1R1 (ESP8266 Boards 2.5.2), upload 921600, 80MHz, WeMos D1R1 Boards 2