sparkfun/OpenScale

Issues

• new feature

  #39 opened a year ago by gvfjnte
  0

• [Info Required]: Need to know the readings

  #38 opened 2 years ago by iamdipanshusingh
  0

• Grams readout

  #37 opened 2 years ago by YarroKing
  0

• Nothing happens after I enter in a known weight

  #36 opened 2 years ago by Erdcgh
  0

• OpenScale gives random, wrong readings

  #35 opened 3 years ago by ernestogqv
  0

• Raspberry Pi Implementation

  #33 opened 4 years ago by Vanlon
  1

• Serious issue with menu interface over Serial Monitor

  #34 opened 3 years ago by chasegrif
  1

• Tare always 8388607 weight nan

  #32 opened 4 years ago by dawidwekwejt
  0

• strange part of the code

  #31 opened 5 years ago by stanislavzekeng
  2

• The readsystemsettings() routine is missing from OpenScale.ino

  #30 opened 5 years ago by AaronBAllen
  2

• cannot load new firmware

  #29 opened 5 years ago by MIKMAI
  4

• Updating firmware

  #28 opened 5 years ago by WyattLiu
  2

• Using Ruby 'rubyserial' or 'serialport' gems to read data

  #25 opened 6 years ago by asachs01
  2

• [Feature Request] Consistent weight measurements across a range of temperatures

  #15 opened 6 years ago by kevinjos
  4

• Openscale does not read the 4 load cells after calibration.

  #26 opened 6 years ago by mbuyikamba
  1

• OpenScale doesn't remember zero point after powering down and up again

  #21 opened 6 years ago by kramer65
  6

• Negative number reported for weight

  #23 opened 6 years ago by adrienhobbs
  4

• System config menu appears multiple times

  #22 opened 6 years ago by Thurgs
  1

• Adding Wifi

  #18 opened 6 years ago by dapug
  2

• Getting "inf" for weight

  #16 opened 6 years ago by felixgalindo
  2

• Readings wrong from third reading. And _always_ from third one.

  #20 opened 7 years ago by kramer65
  2

• Updating Firmware

  #24 opened 6 years ago by asachs01
  1

• How to get scale readings (preferably in Python)?

  #19 opened 7 years ago by kramer65
  1

• Temp and Humidity

  #17 opened 7 years ago by dapug
  2

• openScale:1124: error: 'LOCATION_TRIGGER_CHARACTER' was not declared in this scope EEPROM.write(LOCATION_TRIGGER_CHARACTER, setting_trigger_character);

  #13 opened 7 years ago by janterlaak
  3

• Screw Terminals in .brd/.sch Files

  #11 opened 8 years ago by elizabethsrobert
  1

• Commercial product?

  #6 opened 8 years ago by zoltan-fedor
  19

• Engineering Review

  #9 opened 8 years ago by ToniCorinne
  1

• Engineering checklist issues:

  #10 opened 8 years ago by ericorosel
  3

• Actual v04 Checklist Review

  #8 opened 8 years ago by ericorosel
  2

• v04 Checklist issues

  #7 opened 8 years ago by ericorosel
  1

• checklist v03 (round 2)

  #5 opened 9 years ago by lewispg228
  2

• Checklist v03 protos

  #4 opened 9 years ago by lewispg228
  1

• Standoff screw head might hit RJ45 connector

  #3 opened 9 years ago by lewispg228
  1

• Product name in silk

  #2 opened 9 years ago by lewispg228
  1

• BRD and SCH Issues v01

  #1 opened 9 years ago by lewispg228
  3