Updating Firmware
Closed this issue · 1 comments
asachs01 commented
Howdy 👋 ! I was curious if there was a clear guide on how to update the firmware on the openscale board. I've not been able to find the info on the Sparkfun site, though someone does appear to have done this (see the comments on the board product page).
asachs01 commented
Ah! NVM. Should have read the instructions in the firmware:
OpenScale ships with an Arduino/Optiboot 115200bps serial bootloader running at 16MHz so you can load new firmware
with a simple serial connection. Select 'Arduino Uno' under the boards menu to reprogram the board.