nucleo-board
There are 58 repositories under nucleo-board topic.
makers-for-life/makair
🫁 The world's first open-source ventilator tested on human patients. Mass-producible at a low cost (~2000€).
parezj/EMBO
EMBO - Scope for only $6. Embedded instruments: Oscilloscope, Logic Analyzer, Voltmeter, Counter, PWM and Signal Generator on STM32 MCUs (F1, F3, L4, G4 ....). PC app for Windows, Ubuntu and macOS. Firmware is in C, PC GUI app is in C++ Qt 5.
grblHAL/STM32F4xx
grblHAL driver for ST STM32F4xx (Nucleo-64, Blackpill)
firmwaremodules/stm32-secure-patching-bootloader
Secure Patching Bootloader and Firmware Update System for STM32 MCUs
atakansarioglu/mqtt_temperature_logger_esp8266
Temperature Logger via PAHO MQTT uses ESP8266 and STM32 Nucleo Board
msemegen/CML
Fast, safe and easy to use Cortex-M HAL Library, written in C++ 17
ghent360/PrntrBoard
3D Printer controller board using STM32 NUCLEO-F446 kit TMC2130/2660/2209 drivers
kongr45gpen/spi-sniffer
Debugging tool for SPI devices, built for STM32 microcontrollers
siorpaes/ammeter
Simple graphical ammeter based on INA219 current sensor, SSD1306 display and Nucleo-F070RB
adichell/grbl_port_opencm3
GRBL ported on Cortex-M processors.
jvedder/nucleo_F030R8_w5500
Tinkering with WizNet W5500 Ethernet Chip using an STM32F030R8 Nucleo Board
Embedded-AMS/EmbeddedProto_Example_Makefile
An example for EmbeddedProto on how to setup a project using makefiles.
ref-humbold/3dPrint
3D Printer controller based on STM32F411 Nucleo board
ziteh/stm32-examples
Simple examples for STM32 LL, HAL and LibOpenCM3
ziteh/stm32-oop-lib
STM32 OOP library
f-atwi/Heatsink-Temperature-Reading
A project to read temperature of a heatsink by thermocouples and 3D visualize them on the computer
Inspirate789/STM32-3D-ENGINE
3D engine for STM32 microcontrollers
newAM/nucleo-wl55jc2-rs
Rust boilerplate for the Nucleo-WL55JC2 development board.
divyamSoni/nucleo-STM32F767zi
Basic embedded codes for Nucleo Board (STM32F767zi)
dpm76/Microvacbot
This project aims to develop an open-source educational robot, thus it can be programmed in different ways for beginners up to advanced programmers.
gemesa/rustlink
small set of Rust tools to program STM32 devices
hanyi00i/stm32-nanoedge
NanoEdge AI Studio on Nucleo-32/64 with STM32CubeIDE
harebit/STM32CubeMX_and_NEXTION_Display
Software for Nextion display in Arduino IDE translate to System Workbench with settings from STM32CubeMX
kevintom98/RTOS
RTOS projects on STM32F446RE (ARM CORTEX M4) Nucleo Microcontroller
balaji303/STM-Boards
Here i post programs for STM Boards
FGSVK-hackathon/fortisimm0-hk24
An STM32 project for melody playback
hatwheels/easycat-demo
EtherCAT protocol demo on Nucleo G431RB board + Bausano EasyCAT shield and its arduino libary
mmcza/Position-control-of-a-vehicle-on-a-ramp-using-STM32
Position control of a vehicle on a ramp using a Nucleo board with STM32F746-ZG, It was a project for 5th semester for course Microprocessor Systems (Systemy Mikroprocesorowe).
Sensirion/nucleo-i2c-sht4x
SHT4x driver for STs Nucleo F103RB board with the X-NUCLEO-IKS02A1 shield
thehavva/STM32CUBEIDE
The stm circuits established with the help of Proteus will be coded with the help of stm32cubeide.Also, embedded software samples were created using the Nucleo board/ Stm32G-474RE
martinknapp18/cold_atom
Experimental control system using ARM mbed OS on STM32 Nucleo board
nmanhas2/HC-SR04_STM32F401RE
A quick project I made for distance sensing using the HC-SR04 ultrasonic sensor with a simple state machine and timer input capture interrupts.
Triadziuch/Scigalka-STM32
A program for the STM32L476RG microcontroller sending device rotation data to the computer. The device acts as a controller for a game "Ścigałka".
Bsm-B/Stm32-ublox-7c
Integrating the u-blox 7C GNSS module with the STM32 microcontroller over DMA