/nucleo_F030R8_w5500

Tinkering with WizNet W5500 Ethernet Chip using an STM32F030R8 Nucleo Board

Primary LanguageCOtherNOASSERTION

WizNet W5500 driver for STM32F030R8

Tinkering with WinNet W5500 Ethernet Chip using an STM32F030R8 Nucleo Board

Requirements

  • "Nucleo-F030R9" Developement Board from ST Microelectronics
  • Adafruit "Ethernet FeatherWing" Item #3201
  • Eclipse CDT with "System Workbench for STM32" from openstm32.org
  • Serial Port Terminal (PuTTY, TeraTerm or equivalent).

Setup

  • Connect FeatherWing GND to Nucleo CN7 Pin 8 (GND)
  • Connect FeatherWing 3V to Nucleo CN7 Pin 12 (+3V3)
  • Connect FeatherWing MOSI to Nucleo CN10 Pin 26 (PB15)
  • Connect FeatherWing MISO to Nucleo CN10 Pin 28 (PB14)
  • Connect FeatherWing SCK to Nucleo CN10 Pin 26 (PB13)
  • Connect FeatherWing CS to Nucleo CN10 Pin 16 (PB12)
  • ST-LINK serial port is set to 38400, 8N1

Usage

  • TBD

License:

MIT License