qwiic
There are 50 repositories under qwiic topic.
sparkfun/Pro_Micro
ATMega32U4 Arduino board, available from SparkFun Electronics
sparkfun/Qwiic_Py
Python package for the qwiic system.
wagiminator/ATtiny412-I2C-Rotary-Encoder
Rotary Encoder with I²C Interface
doppelgrau/esp32-f9p-io-board
An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.
SiliconLabs/platform_hardware_drivers
3rd party hardware drivers for EFM32 and EFR32. Go to https://github.com/SiliconLabs/application_examples
sparkfun/Qwiic_I2C_Py
Python package to support multi platform I2C bus integrations
SiliconLabs/third_party_hw_drivers_extension
SDK Extension for third party hardware drivers for EFM32 and EFR32. Go to https://github.com/SiliconLabs/application_examples
sparkfun/SparkFun_DataLogger
Documentation and firmware for the SparkFun DataLogger IoT line of products.
sparkfun/SparkFun_I2C_GPS_Arduino_Library
Library for reading and controlling MT3333 and MT3339 based GPS modules over I2C.
sparkfun/SparkFun_Pulse_Oximeter_Heart_Rate_Sensor
Hardware repo for the Pulse Oximeter Heart Rate Sensor using Maxim Integrated ICs: the MAX32664 Bio Metric Sensor Hub and the MAX30101 Pulse Oximetry and Heart-Rate Module.
sparkfun/Qwiic_BME280_Py
Python module for the qwiic bme280 sensor
sparkfun/SparkFun_Qwiic_TMF882X_Arduino_Library
Arduino Library for SparkFun's Qwiic TMF882X breakout boards
sparkfun/SparkFun_Qwiic_OLED_Arduino_Library
Arduino Library for SparkFun's OLED Qwiic (I²C) boards
sparkfun/SAMD21_Pro_RF
The SparkFun Pro RF is a LoRa®-enabled wireless board that marries a SAMD21 and a long-range RFM95W to make a compact and easy-to-use IoT Arduino board.
sparkfun/Qwiic_SCMD_Py
Python module for the qwiic serial control motor driver
thess/qwiic_alphanumeric_py
Python driver for Sparkfun qwiic 4-digit Alphanumeric display module
milador/Enabled-Controller
A switch interface and an accessible game controller interface in one device.
sparkfun/Qwiic_Relay
This device allows you to control large power loads with simple I2C commands.
sparkfun/SparkFun_Qwiic_Haptic_Driver_DA7280_Arduino_Library
Arduino library support for the SparkFun Qwiic Haptic Driver to control Dialog Semiconductor's DA7280 motor driver IC and the built-in LRA vibration motor via I2C.
sparkfun/SparkFun_Qwiic_Micro_SAMD21E
Hardware repo for the Qwiic Micro SAMD21E development board.
siliconwitchery/s1-popout-board
Breakout development board for the S1 Module
sparkfun/SparkFun_MCP9600_Arduino_Library
An Arduino library to configure and control the MCP9600 Thermocouple Amplifier.
Fescron/Ultimate_Adafruit_MacroPad
An upgraded Adafruit Macropad with easier macro-layer-switching using additional NeoKey buttons (and OLED display). Also includes keyboard-layout switching and dimming as well as a lot of macro-definitions.
sparkfun/Qwiic_Button
The SparkFun Qwiic Button is an I2C enabled button with a built-in LED, interrupts, variable I2C address, and onboard button queues.
sparkfun/SparkFun_Cryptographic_Co-Processor_Breakout_ATECC508A_Qwiic
Product Repo for the ATECC508a Cryptographic Co-processor.
javagoza/I-Was-There
Azure Sphere - AVNET Azure Sphere MT3620 Starter Kit - Securely prove that you have been to a site at a specific time with JSON Web Tokens (JWT) signed in QR format This appliaction creates signed JWTs in QR format and display them in an ink display
sparkfun/Qwiic_CCS811_Py
Python module to interface with the Qwiic CCS811 Board
sparkfun/Qwiic_Soil_Moisture_Sensor_Py
Python module to interface with the Qwiic Soil Moisture Sensor Board
jshufro/esp32_mqtt_bme680
ESP32 Board communicating with a BME680 breakout over I2C and publishing environmental data to an MQTT broker.
sparkfun/Qwiic_Micro_OLED_Py
Python package for the qwiic Micro OLED board
sparkfun/Qwiic_Quad_Relay
The SparkFun Qwiic Quad Relay is a product designed for switching not one, but four high powered devices, from your Arduino or other low powered microcontroller using I2C.
sparkfun/SparkFun_Clock_Generator_5P49V60
Hardware repo for the SparkFun Clock Generator 5P49V60 (Qwiic) breakout board. The board offers a wide range of customizable frequencies in a wide range of different signal types using a single reference clock.
pratik319/ESP32-NAU7802
Code for ESP32 + NAU7802 for load cell || Serial communication & MQTT
RCMgames/BSED
Byte Sized Encoder Decoder - Reads 8 quadrature encoders and communicates over I2C (and is qwiic compatible).