rcswitch
There are 20 repositories under rcswitch topic.
1technophile/OpenMQTTGateway
MQTT gateway for ESP8266 or ESP32 with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ thermometer compatibility & LoRa.
puuu/ESPiLight
ESPiLight - pilight 433.92 MHz protocols library for Arduino
c-klinger/node-raspi-rcswitch-api
RESTful API for the node-rcswitch binding based on Node.js/restify.
LarsBergqvist/Bridging_433MHz_To_MQTT
An ESP8266 sketch that listens to messages over 433MHz radio and transforms them to MQTT messages
LarsBergqvist/ArduinoToRaspberry_via_433Mhz_RF
Example on how an Arduino can send measurements to a Raspberry Pi via RF 433 Mhz
git-developer/RCSwitchFirmata
RCSwitch support for Firmata and FHEM
LarsBergqvist/door_open_detector
A low-energy door open detector based on a Digispark USB board that sends radio signals to a Raspberry Pi when a door is opened
LarsBergqvist/Sensor433
An Arduino Library for sending and receiving data between Arduino boards with simple 433MHz transmitters and receivers
vi7/arduino-rx-test
Example project: 433MHz/315MHz receiver with the Arduino framework
alexandermishin13/rcrecv-daemon
FreeBSD RC receiver daemon for my rcrecv-kmod driver.
alexandermishin13/rcrecv-kmod
FreeBSD kernel driver for gpio based remote control codes receiver.
eocorekuneho/kuneRF
A really basic RF 433MHz switch for a 4 channel relay module.
Le0nWolf/Keyduino-UID-over-433MHz
Keyduino/Arduino Projekt to send a scanned NFC Tag 4 Byte UID over 433Mhz
matthias95/rcsocket
Library and sample application for controlling 433MHz remote controlled sockets using raspberry pi
ey-/rcswitch-pi
RCSwitch implementation for the Raspberry Pi
fcrespel/chacon54662
Chacon 54662 RCSwitch
insolite/node-rcswitch2
NodeJS bindings for the rcswitch
latchdevel/pyRCSwitch
Python module to wrap the RCSwitch Common Library
latchdevel/rc-switch-lib
Adaptation of RCSwitch Arduino library to be used on any system to encode and decode RC codes
remyzerems/StudioController
Remotely switching on/off your home studio devices and speakers the proper way. Control record light sign too with OSC commands !