rtcm

semuconsulting/pygnssutils

Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, RTCM3, NTRIP and SPARTN protocols

semuconsulting/pyrtcm

Python library for parsing RTCM 3 protocol messages.

LORD-MicroStrain/ntrip_client

ROS NTRIP client

Mil1ium/NTRIP_ROS

Recieve RTCM messages from NTRIP caster and get RTK solution for ZED-F9P

Coffeetrac/AG_NTRIP_ESP

AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)

Node-NTRIP/rtcm

Decoder/encoder for all RTCM 3 message types up to RTCM 3.3 Amendment 1 (c10403.3).

liuhanling/GnssParser

一款NMEA、RTCM便捷解析器

asv-soft/asv-gnss

GNSS library for parsing RTCMv2, RTCMv3, NMEA and control recievers througt SBF, ComNav, UBX protocols for .NET

Ericsson/SUPL-3GPP-LPP-client

This project is a set of libraries, examples and tools to facilitate the development of 3GPP LPP clients.

Jin-Whu/gstream

An open-source GNSS-oriented data stream client library.

hagre/RVMT_RTCM-VIA-MQTT-TRANSMITTER

RVMT (RTCM VIA MQTT TRANSMITTER) is using the MQTT protocol (as a secure and opensource alternative to NTRIP) to get RTK correction data for my rover GPS units.

RomeoMe5/De10-Lite_HDL_GPS

Simple verilog project with ability to connect to GPS module using UART and parse NMEA coordinates using finite state machine

martinhakansson/rtcm-rs

Encoding/decoding of RTCM v. 3

alkeldi/pyrtkgps

Manage Real-Time Kinematic GPS (RTK-GPS) with Python

hagre/RTCM_Stream_Splitter_Library

Arduino Library for splitting a RTCM-Stream input byte by byte into seperated messages

simeononsecurity/docker-rtklib-onocoy-rtkdirect

Docker Container that Takes in USB or TCP Based Serial GPS Receiver Output and Forwards the Data to Either Onocoy or RTKDirect or Both.

alschube/gnss-navigation-status

This project was developed in the context of a bachelor's thesis for the applied science degree programme at Heilbronn University. The Goal of this project was centimeter-accurate positioning with a raspberry pi gnss module.

martinhakansson/rtcm-json

JSON serialization/deserialization of RTCM v. 3

hagre/RVMC_RTCM-VIA-MQTT-CASTER

Caster for RVMP (RTCM Via MQTT Protocol) using the MQTT msg/protocol (as a secure and opensource alternative to NTRIP) to get RTK correction data from BaseStations to Broker and to Rover GPS units.

hagre/RVMP_RTCM-VIA-MQTT-PROTOCOL

In use by RVMT (RTCM Via MQTT Transmitter) using the MQTT msg/protocol (as a secure and opensource alternative to NTRIP) to get RTK correction data from BaseStations to Broker and to Rover GPS units.

maxdod/ArduinoNtripClient

An Arduino Ntrip client to dispatch rtcm ros topic for Ublox fp9 GPS Rtk corrections

unagiew/RTCManalyze

NoahFeldt/GPS-From-Scratch

This project aims to implement GPS positioning from scratch with some simplifying assumptions.

abdullahdangac/ntripclient

NTRIP Line Client