tmc2208
There are 21 repositories under tmc2208 topic.
watterott/SilentStepStick
Stepper Motor Driver based on a Trinamic TMC2100 / TMC2130 / TMC2208 / TMC2209 / TMC5160.
le3tspeak/Marlin-2.0.X-MKS-Robin-Nano
Marlin 2.0.X for the MKS Robin Nano 1.1/1.2
GadgetAngel/SKR-V1.4-Turbo-Stepper-Driver-Jumper-Configuration-Manual
SKR V1.4 TURBO Stepper Driver Jumper Configuration Manual
teemuatlut/Marlin
This fork of 3Dprinter firmware Marlin aims to add better support for Trinamic TMC drivers.
GadgetAngel/GTR-V1.0-Stepper-Driver-Jumper-Configuration-Manual
GTR V1.0 Stepper Driver Jumper Configuration Manual
juanmf/StepperMotors
Python stepper motor library with customizable acceleration strategies and responsive, interruptible motor operations.
GadgetAngel/SKR-PRO-V1.1-Stepper-Driver-Jumper-Configuration-Manual
SKR PRO V1.1 Stepper Driver Jumper Configuration Manual
manoukianv/TMC2208Pilot
Application running on Arduino to setup and monitor TMC2208 by UART. Design to works with smoothiware firmware.
daveydaid/Electromechanical-7Segment
Source code for controlling a 28-stepper motor 7-segment display with a single Arduino Mega2560
GadgetAngel/SKR-V1.3-Stepper-Driver-Jumper-Configuration-Manual
SKR V1.3 Stepper Driver Jumper Configuration Manual
Sergey-77/Cetus3d_TMC2208
TMC2208 Extension board for Cetus3d mk3
GadgetAngel/SKR-V1.4-Stepper-Driver-Jumper-Configuration-Manual
SKR V1.4 Stepper Driver Jumper Configuration Manual
ccrobot-online/MEEB_3DP
A 32bit board with STM32F103RC, support both Marlin 2.0 and Klipper firmware, On-board TMC2208 UART with both TX/RX interface no additional wiring is required, On-board USB TYPE-C connector for easy communicate, and optimized for the MEEB or Octoprint serial host printing. MEEB_3DP also have got a RS422 serial bus interface for Long-distance reliable communication.
bagobor/aklp_skr13_marlin20
Marlin's 2.0.x fork for Anycubic Kossel Linear Plus + SKR 1.3
nager/Nager.ArduinoStepperMotor
.NET control a stepper motor via arduino
rsxtrix/ESP32-TMC2208-MicroPython-Driver
A basic driver for the ESP32 to communicate with a TMC2208 stepper driver board.
bloodygoodbloke/Prusa_I3_3Dprinter
Geeetech 3D printer (base on marlin 1.1.8)
Stevenbperry/StarSync_CDP
CDP Github
jporter-dev/Marlin-CR-10S-SKR-V1.4-TMC2208
Marlin 2.0.x built for Ender CR-10S with BTT SKR v1.4 and TMC2208 drivers