teemuatlut/TMCStepper

Issues

• Updated Resource to Help Those Struggling with the TMC2209

  #304 opened 4 months ago by daniel-frenkel
  4

• TMC2209 returns wrong microsteps from the REGISTRY when it is set to 4

  #306 opened a month ago by korianv
  0

• TMC5160 Pro SD_Mode and Microstep HELP NEEDED

  #305 opened 3 months ago by Dhruvpal-Mehru
  0

• SPI bus CS signal Time Bug between TMC and CPU

  #303 opened 6 months ago by fixus971
  1

• Hardware UART no longer working on ESP32 boards due to Espressif updating from 2.X to 3.0

  #302 opened 7 months ago by benpeart
  1

• Cant make TMC5160 from BTT to work

  #268 opened 2 years ago by Phil1988
  8

• Help with rapidly fluctuating intermittent StallGuard values

  #293 opened a year ago by Okscientist
  2

• Current not setting up in TMC2209 on Arduino Uno using UART

  #288 opened a year ago by kirito2908
  1

• Stealthchop voltage across sense resistor - no sinewave?

  #301 opened 9 months ago by iNoob610
  0

• TMC 2160 ISSUE

  #300 opened 9 months ago by AngeloZaccarin
  0

• Newbie: Arduino MEGA 2560 to TMC5160T wiring

  #299 opened 9 months ago by rudibr
  0

• TMCstepper Examples is not working

  #298 opened 10 months ago by tvixen
  0

• Can you share stallGuard example for TMC5160

  #282 opened a year ago by MarkEvens
  1

• TMC2209 stops working after esphome update.

  #290 opened a year ago by nanobyte84
  1

• How to switch off stealthChop mode in library for TMC2209?

  #296 opened 10 months ago by dmitryBorisenkoXioneer
  0

• Need Immediate Motor Stop Strategy via SPI Commands without Hardware Changes

  #295 opened a year ago by cuishuang413
  0

• BigTreeTech Octopus v1.1 and TMC2209 error

  #294 opened a year ago by Sangra69
  1

• class TMC5160Stepper' has no member named 'SGTHRS

  #283 opened a year ago by MarkEvens
  7

• TMC5240 support

  #289 opened a year ago by G-Pereira
  1

• link to detail documentation of https://github.com/teemuatlut/TMC2208Stepper is missing

  #292 opened a year ago by StefanL38
  0

• Tmc2209 current setting not working sometime

  #287 opened a year ago by Akshar062
  0

• AMS5147U with TMC5160

  #286 opened a year ago by Rincewind08
  0

• UNO R4 Compatibility?

  #285 opened a year ago by JohnHawkes
  0

• TMC 2300 Support

  #284 opened a year ago by fabianmuehlberger
  0

• shaft() does not always work?

  #256 opened 2 years ago by cranefist
  3

• Is it possible to use all the features of TMC2209 straight from an Arduino Uno or an ESP32 (classic)? Or is an extra motor controller (such as the CNC shield)?

  #279 opened 2 years ago by 01GOD
  2

• TMC2208Stepper::VACTUAL is uint32_t, but must be signed datatype

  #281 opened a year ago by RalfR68
  0

• Not initialized for current sensing with TMC2209

  #280 opened a year ago by berkut0
  2

• TMC5160 with ESP32 SPI mode

  #274 opened 2 years ago by cholet852
  1

• D1 Mini (ESP8266), TMC2208, Software serial - throwing exception

  #277 opened 2 years ago by Mazvy
  8

• Can post a pinout for using an Arduino Uno with TMC2209? Thanks in advance!

  #278 opened 2 years ago by 01GOD
  0

• Support for TMC2240

  #275 opened 2 years ago by discip
  1

• Live_tune.ino won't compile

  #262 opened 2 years ago by aguaviva
  1

• New Udemy course for anyone struggling to understand this library

  #276 opened 2 years ago by daniel-frenkel
  0

• Unable to get StallGuard to work

  #272 opened 2 years ago by sidn007
  2

• TMC5160 won't rotate stepper via SPI

  #273 opened 2 years ago by n4bft
  1

• TMC429 controlling 2 TMC2209 stepper drivers

  #265 opened 2 years ago by arkem709
  1

• Controlling Bipolar Stepper Motor with TMC5160 BOB and Teensy 4.1

  #267 opened 2 years ago by gsimmers
  1

• IOIN & Dir pin

  #271 opened 2 years ago by cranefist
  0

• Need help on stm32, sorry to bother

  #269 opened 2 years ago by Tilie
  0

• just one connected TMC2209 with add.0b00 worked and the other 0b11 didn't work

  #254 opened 2 years ago by brainhasan
  4

• Arduino Uno + TMC2160 + Nema23, driver not working

  #266 opened 2 years ago by MrBlackMagic
  2

• Change Speed

  #264 opened 2 years ago by zelli42
  2

• Why is the TMC2208 stepper address hardcoded?

  #263 opened 2 years ago by aguaviva
  2

• Using Arduino Uno, CNC shield and TMC2208 in UART

  #261 opened 2 years ago by AndyBerllan
  1

• TMC2300: Setting micro-steps in setup() requires supply reset

  #260 opened 2 years ago by gigiHondaT
  0

• ESP32 SOFTWARE SERIAL USE

  #257 opened 2 years ago by Rmdhn1
  2

• TMC2209 Stallguard example: only stopped motor gives usable serial monitor numbers

  #259 opened 2 years ago by TrulyMarcus
  2

• XACTUAL and VACTUAL always zero on TMC5160

  #253 opened 2 years ago by maceiras
  0

• Will this driver work with a TMC2590?

  #252 opened 2 years ago by jfdi42
  0