tmc5160
There are 16 repositories under tmc5160 topic.
watterott/SilentStepStick
Stepper Motor Driver based on a Trinamic TMC2100 / TMC2130 / TMC2208 / TMC2209 / TMC5160.
terjeio/Trinamic-library
Plain C library for Trinamic TMC2130 stepper drivers
GadgetAngel/SKR-V1.4-Turbo-Stepper-Driver-Jumper-Configuration-Manual
SKR V1.4 TURBO Stepper Driver Jumper Configuration Manual
teemuatlut/Marlin
This fork of 3Dprinter firmware Marlin aims to add better support for Trinamic TMC drivers.
GadgetAngel/GTR-V1.0-Stepper-Driver-Jumper-Configuration-Manual
GTR V1.0 Stepper Driver Jumper Configuration Manual
GadgetAngel/SKR-PRO-V1.1-Stepper-Driver-Jumper-Configuration-Manual
SKR PRO V1.1 Stepper Driver Jumper Configuration Manual
GadgetAngel/SKR-PRO-V1.2-Stepper-Driver-Jumper-Configuration-Manual
SKR PRO V1.2 Stepper Driver Jumper Configuration Manual
GadgetAngel/SKR-V1.3-Stepper-Driver-Jumper-Configuration-Manual
SKR V1.3 Stepper Driver Jumper Configuration Manual
GadgetAngel/SKR-V1.4-Stepper-Driver-Jumper-Configuration-Manual
SKR V1.4 Stepper Driver Jumper Configuration Manual
LeBassiste/Marlin-2.0.5.3-SKR-V1.4-Turbo-UM2Plus
Marlin Configuration for use with BTT SKR V1.4 Turbo + TMC5160 on Ultimaker UM2+ chassis
grblHAL/Plugins_motor
grblHAL motor plugins
BinghamtonRover/Arm-Firmware
Arduino IDE sketches to run on a Teensy MCU and control the rover arm and gripper
ean365/Smoothieware-SPI
Add feature for Smoothieware to allow initialization of raw registers for any stepper driver on the SPI bus, such as TMC5160. Smoothieware: Modular, opensource, high performance G-code interpreter and CNC controller written in Object-Oriented C++
hacknus/tmc5160-rs
A platform agnostic rust driver for the TMC5160 Trinamic integrated stepper motor controller.
BinghamtonRover/TMC-Firmware
An Arduino library for manipulating the TMC Motor drivers