ublox
There are 103 repositories under ublox topic.
vshymanskyy/TinyGSM
A small Arduino library for GSM modules, that just works
KumarRobotics/ublox
A driver for ublox gps
u-blox/ubxlib
Portable C libraries which provide APIs to build applications with u-blox products and services. Delivered as add-on to existing microcontroller and RTOS SDKs.
ktuukkan/marine-api
Java Marine API - NMEA 0183 library for Java
emlid/Navio2
C++ and Python sensor examples for developers
sparkfun/SparkFun_Ublox_Arduino_Library
Library to control UBX binary protocol and NMEA over I2C on Ublox GPS modules
HKUST-Aerial-Robotics/ublox_driver
A driver for u-blox receiver (ZED-F9P) with ros support
bolderflight/ublox
Arduino and CMake library for communicating with uBlox GPS receivers.
SimpleMethod/STM32-GNSS
STM32 library with DMA support for u-blox devices supporting Global Navigation Satellite Systems and UBX standard. Successfully tested on: NEO-M8, MAX-M8, NEO-M9N
arobenko/ublox
C++(11) implementation of all UBX binary protocol messages used by u-blox 4/5/6/7/8 GPS receivers
Mil1ium/NTRIP_ROS
Recieve RTCM messages from NTRIP caster and get RTK solution for ZED-F9P
aussierobots/ublox_dgnss
This usb based ROS2 driver is focused on UBLOX Generation 9 UBX messaging, for a DGNSS rover. High precision data is available.
commschamp/cc.ublox.commsdsl
CommsDSL schema-based definition of UBLOX protocol
gokulp01/ros2-ublox-zedf9p
ROS2 drivers for U-blox ZED F9P
ethz-asl/ublox_utils
Repository with tools for the ublox RTK receiver.
tiagofreire-pt/rpi_uputronics_stratum1_chrony
A straightforward and highly optimized approach to achieve a cost-effective Stratum 1 NTP server using a Raspberry Pi 5B and an Uputronics GPS HAT
ldab/u-blox_GNSS
u-blox GNSS receiver library light weight for low power tracking application
Nevvman18/rs41-nfw
Versatile, feature-rich and user-friendly custom firmware for ALL revisions of Vaisala RS41 radiosondes
MuratovAS/gps-ntp-eth-esp32
Simple NTP server with GPS satellites synchronization.
FactbirdHQ/ublox-cellular-rs
A driver crate for the entire u-blox cellular family in Rust
ThunderFly-aerospace/TFGPS01
UAV GNSS navigation module with RTK capability.
Huibean/ublox.js
node.js driver for ublox gps
u-blox/m-center
Collection of AT scripts that can be incorporated and used on the u-blox m-center tool.
VimDrones/open-rtk
open source rtk base
khoih-prog/WiFiManager_Generic_Lite
"Library to configure MultiWiFi/Credentials at runtime for Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano RP2040 Connect, RASPBERRY_PI_PICO), AmebaD RTL8720DN, etc. boards, using Generic WiFi (WiFiNINA, WiFi101, ESP8266-AT, ESP32-AT, etc.) modules/shields. You can also specify DHCP HostName, static AP and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Credentials are saved in LittleFS/InternalFS, (emulated-)EEPROM, FlashStorage_SAMD, FlashStorage_STM32, FlashStorage_RTL8720 or DueFlashStorage. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. DoubleDetectDetector as well as Virtual Switches feature permits entering Config Portal as requested. Now using WiFiMulti_Generic library
balamuruganky/Ublox_Linux_Library
Ublox Linux Library
MrCerealKiller/ros_f9p_driver
ROS driver for u-blox ZED-F9P GNSS System based on NMEA Messages 🌎
sparkfun/SparkFun_u-Blox_NEO_M9N
The SparkFun NEO-M9N GPS Breakout is a high quality, GPS board with equally impressive configuration options.
AxDen-Dev/CC1312R1_Solar_Power_Asset_Tracker_example_gcc
CC1312R1 Sub-G Solar power asset tracker
Gbertaz/GloBoSaT
General Purpose Satellite Tracker
ldab/Node-RED-Energy-Harvesting-dashboard
Node-RED Energy Harvesting dashboard example, weather forecast, temperature and humidty measurement. MQTT, ESP32, u-blox NINA-W10, HTU21D, IBM Cloud, CloudMQTT
swisscheese38/rtklawnmower
ROS and GPS RTK based lawn mower
eclipse-ecal/ecal-gpsd-client
eCAL interface to the linux gps service daemon
alkeldi/pyrtkgps
Manage Real-Time Kinematic GPS (RTK-GPS) with Python
Hameem1/Indoor-Localization-using-CellLocate
Makes use of the CellLocate feature for indoor position estimation without GPS. When GPS is available, the location is calculated using CellLocate and GPS data in a hybrid configuration.
semuconsulting/pyspartn
Python library for parsing SPARTN protocol messages.