This software is `Standard client firmware' for Sakura's MONOPLATFORM.
Target divice are SCO-M5SNRF9160 and SCM-LTEM1NRF.
See nRF Connect SDK Getting started.
If you want to install the development environment quickly, see Installing the nRF Connect SDK through nRF Connect for Desktop.
Using nRF Connect SDK v1.7.1 .
git clone https://github.com/sakura-internet/sipf-std-client_nrf9160.git
cd sipf-std-client_nrf9160
rm -rf build
Use build.sh
for build.
./build.sh [target] [board]
target
- develop (default)
- staging
- production
- local
board
- scm-ltem1nrf_nrf9160ns (default)
- nrf9160dk_nrf9160_ns
- thingy91_nrf9160_ns
For develop / SCM-LTEM1NRF and SCO-M5SNRF9160
./build.sh
For production / SCM-LTEM1NRF and SCO-M5SNRF9160
./build.sh production
For production / nRF9160DK
./build.sh production nrf9160dk_nrf9160_ns
For local only
cp -n prj.conf.develop prj.conf.local
vi prj.conf.local
./build.sh local
nrfjprog
is required.
For develop
./flash.sh
For production
./flash.sh production
OR
Write the HEX image file 'build/{ENV}/zephyr/merged.hex' using nRF Connect `Programmer' application.
Please refer to the Wiki(Japanese) for specifications.