Pinned Repositories
a-culfw
Alternative culfw
alex_reinerts_pcb
Some of my PCBs
AskSinPP
autoconf
Tasmota autoconf device configurations storage
busware-esp32
culfw
Firmware development for busware.de radio devices
debmatic
debmatic is a project to install the Homematic OCCU on Debian based systems (Debian, Ubuntu, Raspbian, Armbian)
ESP_AVRISP
An avr programmer for ESP32
ha-addon-raspmatic
TEST
HA_enoceanmqtt
Home Assistant wrapper for enocean-mqtt (https://github.com/embyt/enocean-mqtt)
tostmann's Repositories
tostmann/culfw
Firmware development for busware.de radio devices
tostmann/busware-esp32
tostmann/a-culfw
Alternative culfw
tostmann/alex_reinerts_pcb
Some of my PCBs
tostmann/AskSinPP
tostmann/autoconf
Tasmota autoconf device configurations storage
tostmann/debmatic
debmatic is a project to install the Homematic OCCU on Debian based systems (Debian, Ubuntu, Raspbian, Armbian)
tostmann/ESP_AVRISP
An avr programmer for ESP32
tostmann/ha-addon-raspmatic
TEST
tostmann/HA_enoceanmqtt
Home Assistant wrapper for enocean-mqtt (https://github.com/embyt/enocean-mqtt)
tostmann/Improv-WiFi-Library
Improv WiFi library
tostmann/HA_enoceanmqtt-addon
Home Assistant addon for HA_enoceanmqtt (https://github.com/mak-gitdev/HA_enoceanmqtt)
tostmann/install
Tasmota Web Installer and firmware repository
tostmann/ioLibrary_Driver
Create a repository of WIZnet ioLibrary.
tostmann/JP-HB-Devices-addon
tostmann/knxd
tostmann/KnxTpUart
This is a fork of the KnxTpUart Library by Thorsten Gehrig.
tostmann/MHI-AC-Ctrl
Reads and writes data (e.g. power, mode, fan status etc.) from/to a Mitsubishi Heavy Industries (MHI) air conditioner (AC) via SPI controlled by MQTT
tostmann/mosquitto
Eclipse Mosquitto - An open source MQTT broker
tostmann/occu
tostmann/packet_forwarder
A LoRa packet forwarder is a program running on the host of a LoRa gateway that forwards RF packets receive by the concentrator to a server through a IP/UDP link, and emits RF packets that are sent by the server.
tostmann/panstamp
panStamp wireless ecosystem - Project files
tostmann/piVCCU
piVCCU is a project to install the original Homematic CCU2 firmware inside a virtualized container (lxc) on ARM based single board computers.
tostmann/RaspberryMatic
:house: A lightweight, buildroot-based Linux operating system alternative for your CCU3, ELV-Charly or for running your IoT "HomeMatic CCU" as a virtual appliance (using ESXi, Proxmox, VirtualBox, Docker/OCI, Kubernetes/K8s, Home Assistant, etc.) or on your own RaspberryPi, Tinkerboard, ODROID, etc. SBC devices...
tostmann/rpi-busware
tostmann/rpi-linux
additional supporting patches
tostmann/rpi-rgb-led-matrix
Controlling up to three chains of 32x32 or 16x32 RGB LED displays using Raspberry Pi GPIO
tostmann/Tasmota
Alternative firmware for ESP8266 and ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at
tostmann/w5x00
Linux Kernel driver for WIZnet W5200 and W5500
tostmann/xboot
XBoot Extensible Bootloader