Issues
- 2
Please fix issues reported by adapter checker
#64 opened by mcm1957 - 16
- 2
ems-esp.0.gateway.DateTime
#65 opened by Tim19791 - 3
wrong formatting options for api/mqtt bool format in ems-esp settings -> correct: 1/0
#67 opened by unstressable - 5
Please readd tests for windows and mac
#54 opened by mcm1957 - 1
- 7
- 6
Einige Attribute besitzen die falschen Datetypen
#56 opened by mattreim - 2
- 4
update ioBroker.ems-esp failed
#52 opened by latte-macchiato - 7
- 1
- 13
- 1
Unusal files at adapter root - please check
#49 opened by mcm1957 - 19
- 1
error reading KM200 gateway information (wrong passwords please re-enter) - stop km200 read
#48 opened by SkorpionMB - 3
Please allow km200_polling < 90
#31 opened by EvilEls - 1
State value to set for "ems-esp.0.dhwCircuits.dhw1.temperatureLevels.high" has value "48" greater than max "46"
#43 opened by EvilEls - 10
- 1
- 0
Support of new Bosch Gateways - e.g. MX300
#25 opened by tp1de - 13
- 1
- 3
Adapter crash v2.6.0
#40 opened by mbhomie007 - 46
Value not send to MB-Lan ?
#38 opened by jheisel01 - 4
Green Lamp - Gateway unreachable
#39 opened by unstressable - 13
History DB Issue with KM200 Monthly Recordings
#37 opened by Track4123 - 28
- 3
Edit KM200.csv
#35 opened by sello89 - 0
- 20
- 4
Some sensor Data wrong values?
#33 opened by Track4123 - 9
error reading KM200 gateway information (wrong passwords please re-enter) - stop km200 read
#28 opened by martin-ef - 2
Dauerhafte Warneineinträge im Protokoll
#29 opened by Cortexlentis - 33
Warnung nach Update von V1.30.0 auf V2.1.0
#27 opened by IOGogo - 4
Please fix issues reported by adapter checker
#26 opened by mcm1957 - 2
feature: MX300
#24 opened by mr-suw - 15
- 6
Adapter stürzt immer wieder ab
#21 opened by crusader85 - 7
- 24
Adapter stürzt immer wieder ab
#20 opened by MatzeFro - 1
- 6
Wirkungsgradberechnung
#17 opened by joschi71r - 4
error ems read status
#18 opened by cyberoner1 - 15
State values are not beeing aknowledged after successful change in ems-esp or km200 by the adapter
#15 opened by tglynx - 1
ems-esp.0.thermostat.hc1 uses the parameters of "internal temperature offset"
#16 opened by harvey637 - 3
- 1
- 17
- 1
Confusing config. description in readme.md
#11 opened by Hans-JR