Class based interface to the Pico (Omega) PT-104 RTD DAQ Module
- libusbpt104 (see installation)
- discover units connected via USB (Ethernet untested)
- Configure the Channels
- Reading of measured values
- Documentation
- Configure the ethernet interface
- Connection via ethernet
- usage on Windows
Linux installation: 1. Install libusb104 following https://www.picotech.com/downloads/linux
Ubuntu 18.04:
sudo bash -c 'echo "deb https://labs.picotech.com/debian/ picoscope main" >/etc/apt/sources.list.d/picoscope.list' wget -O - https://labs.picotech.com/debian/dists/picoscope/Release.gpg.key | sudo apt-key add - sudo apt-get update sudo apt-get install libusbpt104
Install this package:
sudo pip3 install https://github.com/trombastic/Pico_PT104/archive/master.zip
from PT104 import PT104, Channels, DataTypes, Wires unit = PT104() unit.connect('AY429/026') unit.set_channel(Channels.CHANNEL_1, DataTypes.PT100, Wires.WIRES_4) value = unit.get_value_channel_1 if value: print('CH1: %1.3f'%value) unit.disconnect()
- Issue Tracker: https://github.com/trombastic/Pico_PT104/issues
- Source Code: https://github.com/trombastic/Pico_PT104
The project is licensed under the _GNU General Public License v3 (GPLv3)_.