tronikos/esphome-magnetometer-water-gas-meter

Issues

• Two Meters not working

  #34 opened a month ago by spydazcomputers
  2

• Possible to use a single ESP 32

  #31 opened 2 months ago by spydazcomputers
  1

• Axis and threshold values are reset every time the ESP32 is disconnected

  #4 opened 6 months ago by sesardelaisla
  2

• Datasheet for Badger Meter

  #26 opened 3 months ago by daelsc
  0

• ESP32 fails to boot with latest esphome-gas-meter.yaml update on July 14

  #22 opened 4 months ago by jac2424
  2

• Esp8266 Slow Response

  #21 opened 4 months ago by jbronikowski
  4

• No consumption recorded

  #20 opened 4 months ago by JustApu
  1

• For a gas meter measuring in CCF, "Volume per half rotation" should be 0.00125

  #7 opened 5 months ago by 42Network
  0

• Use this project to monitor gas water heater on/off

  #8 opened 5 months ago by 42Network
  0

• Half rotations total not increasing unless being calibrated

  #6 opened 6 months ago by jac2424
  8

• Polling rate too slow for most meters

  #2 opened 6 months ago by mkmer
  16

• Gas flow refresh rate is not consistent while gas is flowing

  #3 opened 6 months ago by sesardelaisla
  1