This is the base Nerves System configuration for the Raspberry Pi A+, B, and B+. It will also work with the Raspberry Pi Zero, but usually nerves_system_rpi0 is preferable since it configures the USB port so that it can be plugged into a computer. This is very convenient for powering and debugging the Pi Zero. If you want to use the Raspberry Pi Zero's USB port in "host" mode (e.g., to attach a USB Flash drive or other peripheral), then this repository works and may be more appropriate.
This is not the configuration for the Raspberry Pi 2 or 3.
Feature | Description |
---|---|
CPU | 700 MHz ARM1176JZF-S for A+, B, and B+, 1 GHz ARM1176JZF-S for the Zero |
Memory | 256 MB for rev 1 boards, 512 MB for rev 2 and the Zero |
Storage | MicroSD |
Linux kernel | 4.4.50 w/ Raspberry Pi patches |
IEx terminal | HDMI and USB keyboard (can be changed to UART) |
GPIO, I2C, SPI | Yes - Elixir ALE |
ADC | No |
PWM | Yes, but no Elixir support |
UART | 1 available - ttyAMA0 |
Camera | Yes - via rpi-userland |
Ethernet | Yes |
WiFi | Requires USB WiFi dongle |
Bluetooth | Not supported |
The base image includes drivers and firmware for Ralink RT53xx
(rt2800usb
driver) and RealTek RTL8712U (r8712u
driver) devices.
We are still working out which subset of all possible WiFi dongles to support in our images. At some point, we may have the option to support all dongles and selectively install modules at packaging time, but until then, these drivers and their associated firmware blobs add significantly to Nerves release images.
If you are unsure what driver your WiFi dongle requires, run Raspbian and configure WiFi
for your device. At a shell prompt, run lsmod
to see which drivers are loaded.
Running dmesg
may also give a clue. When using dmesg
, reinsert the USB
dongle to generate new log messages if you don't see them.
Add nerves_system_rpi
to your list of dependencies in mix.exs
:
def deps do
[{:nerves_system_rpi, "~> 0.11.0"}]
end
Image credit: This image is from the Fritzing parts library.