truglodite

3D-Printer-Enclosure

Arduino PID heated/cooled 3d printer enclosure controller w/ display & Octoprint integration..

ardupilot

ArduPlane, ArduCopter, ArduRover source

AtariJoysticksPlus

BLDynoMega

Arduino code for a serial output brushless motor dyno system

BlynkDHTbaroDallasPIRbeep

Code for an ESP8266, DHTXX humidity, MS5611 baro, Dallas temp, PIR motion, and a logic input beeper.

BlynkDHTbatt

Code for a battery powered ESP8266 w/ DHTXX temperature and humidity, that communicates with Blynk.

Dehydrator

Precision control for food dehydrators

ESP-MQTT-DHT-Batteries

Battery safe code for an ESP8266 node that reports temperature and humidity via MQTT.

grbl-Mega-5X

5/6 Axis version of Grbl, the open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on an Arduino Mega2560

Home-Assistant-Serial-Sidecar

Code to turn an arduino board into a serial sensor device for use with Hass or similar system.

truglodite/Dehydrator

Precision control for food dehydrators

truglodite/3D-Printer-Enclosure

Arduino PID heated/cooled 3d printer enclosure controller w/ display & Octoprint integration..

truglodite/ESP-MQTT-DHT-Batteries

Battery safe code for an ESP8266 node that reports temperature and humidity via MQTT.

truglodite/BLDynoMega

Arduino code for a serial output brushless motor dyno system

truglodite/grbl-Mega-5X

5/6 Axis version of Grbl, the open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on an Arduino Mega2560

truglodite/Home-Assistant-Serial-Sidecar

Code to turn an arduino board into a serial sensor device for use with Hass or similar system.

truglodite/ardupilot

ArduPlane, ArduCopter, ArduRover source

truglodite/AtariJoysticksPlus

truglodite/BlynkDHTbaroDallasPIRbeep

Code for an ESP8266, DHTXX humidity, MS5611 baro, Dallas temp, PIR motion, and a logic input beeper.

truglodite/BlynkDHTbatt

Code for a battery powered ESP8266 w/ DHTXX temperature and humidity, that communicates with Blynk.

truglodite/BlynkDHTdallasPIRbeep

Code for an ESP8266, DHTXX humidity, Dallas temp, PIR motion, and a 3v3 beeper

truglodite/BlynkPIRbatt

Code for a battery powered ESP8266 module and PIR sensor that interacts with Blynk.

truglodite/ESP-MQTT-DHT-Dallas-PIR-Beep

The name says it all

truglodite/esphome

ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems.

truglodite/esphome-docs

Source for esphome.io documentation files.

truglodite/home-assistant.io

:blue_book: Home Assistant User documentation

truglodite/logic-analyzer

Logic Analyzer, for Arduino, AVR, ESP8266 and STM32 with a very nice working processing interface, you could run it also on any Android device.

truglodite/lovelace-floorplan

truglodite/NerfGun

A fancier nerf gun chronograph and ammo counter project.

truglodite/rx5808-pro-diversity

DIY project to create your own 5.8ghz FPV diversity basestation - based off the rx5808 receiver module. Project includes basic Arduino Nano implementation to advanced custom PCB board and introduction to digital switches 4066 chip.

truglodite/scarab-osd

MWOSD development repository

truglodite/Wire-Wiggler-Firmware

Wire Wiggler is an open source satellite antenna rotator firmware that uses stepper motors to aim an antenna.