/node-yamaha-avr

Node.js module for controlling Yamaha RX-series receiver

Primary LanguageJavaScript

node-yamaha-avr

This was part of a test project for adding a new device to The Thing System home automation platform.

If you are looking for a node.js library for controlling Yamaha receivers, I recommend you to check e.g. https://github.com/PSeitz/yamaha-nodejs.

Node.js module for controlling Yamaha RX-V-series receiver (HTTP API)

npm install

npm test

Command line arguments

node main.js [IP_ADDRESS] COMMAND PARAMETERS

If IP_ADDRESS is omitted, the receiver's IP will be automatically discovered via SSDP. Discovery can take up to 3 seconds.

COMMAND can be one of the following:

  • s get status
  • c get system configuration
  • p set power (on/off)
  • m set mute (on/off)
  • v set volume (in 0.5 dB steps from –80.5 dB to 16.5 dB (very loud!), written as -805 to 165)
  • i set input (HDMIx, AVx, AUDI, TUNER ...)
  • e set scene (1, 2, 3 ...)

Examples:

node main.js s
node main.js c
node main.js p on
node main.js p off
node main.js m on
node main.js m off
node main.js v -550
node main.js i HDMI1
node main.js e 2