ComfyUI IPAdapter plus
ComfyUI reference implementation for IPAdapter models.
IPAdapter implementation that follows the ComfyUI way of doing things. The code is memory efficient, fast, and shouldn't break with Comfy updates.
Important updates
2023/11/26: Added timestepping. You may need to delete the old nodes and recreate them. Important: For this to work you need to update ComfyUI to the latest version.
2023/11/24: Support for multiple attention masks.
2023/11/23: Small but important update: the new default location for the IPAdapter models is ComfyUI/models/ipadapter
. No panic: the legacy ComfyUI/custom_nodes/ComfyUI_IPAdapter_plus/models
location still works and nothing will break.
2023/11/08: Added attention masking.
2023/11/07: Added three ways to apply the weight. See below for more info. This might break things! Please let me know if you are having issues. When loading an old workflow try to reload the page a couple of times or delete the IPAdapter Apply
node and insert a new one.
2023/11/02: Added compatibility with the new models in safetensors format (available on huggingface).
2023/10/12: Added image weighting in the IPAdapterEncoder
node. This update is somewhat breaking; if you use IPAdapterEncoder
and PrepImageForClipVision
nodes you need to remove them from your workflow, refresh and recreate them. In the examples you'll find a workflow for weighted images.
2023/9/29: Added save/load of encoded images. Fix minor bugs.
(previous updates removed for better readability)
What is it?
The IPAdapter are very powerful models for image-to-image conditioning. Given a reference image you can do variations augmented by text prompt, controlnets and masks. Think of it as a 1-image lora.
Example workflow
Video Introduction
Installation
Download or git clone this repository inside ComfyUI/custom_nodes/
directory.
The pre-trained models are available on huggingface, download and place them in the ComfyUI/models/ipadapter
directory (create it if not present). You can also use any custom location setting an ipadapter
entry in the extra_model_paths.yaml
file.
Note: the legacy ComfyUI/custom_nodes/ComfyUI_IPAdapter_plus/models
is still supported and it will be ignored only if the global directory is present.
For SD1.5 you need:
- ip-adapter_sd15.bin
- ip-adapter_sd15_light.bin, use this when text prompt is more important than reference images
- ip-adapter-plus_sd15.bin
- ip-adapter-plus-face_sd15.bin
- ip-adapter-full-face_sd15.bin
- ip-adapter_sd15_vit-G.bin, this model requires the vit-bigG image encoder (the SDXL one below)
For SDXL you need:
- ip-adapter_sdxl.bin
- ip-adapter_sdxl_vit-h.bin This model requires the use of the SD1.5 encoder despite being for SDXL checkpoints
- ip-adapter-plus_sdxl_vit-h.bin Same as above, use the SD1.5 encoder
- ip-adapter-plus-face_sdxl_vit-h.bin As always, use the SD1.5 encoder
Please note that now the models are also available in safetensors format, you can find them on huggingface.
Additionally you need the image encoders to be placed in the ComfyUI/models/clip_vision/
directory:
- SD 1.5 model (use this also for all models ending with _vit-h)
- SDXL model
You can rename them to something easier to remember or put them into a sub-directory.
Note: the image encoders are actually ViT-H and ViT-bigG (used only for one SDXL model). You probably already have them.
How to
There's a basic workflow included in this repo and a few examples in the examples directory. Usually it's a good idea to lower the weight
to at least 0.8
.
The noise
paramenter is an experimental exploitation of the IPAdapter models. You can set it as low as 0.01
for an arguably better result.
More info about the noise option
![canny controlnet](https://raw.githubusercontent.com/ttulttul/ComfyUI_IPAdapter_plus/main/./examples/noise_example.jpg)
Basically the IPAdapter sends two pictures for the conditioning, one is the reference the other --that you don't see-- is an empty image that could be considered like a negative conditioning.
What I'm doing is to send a very noisy image instead of an empty one. The noise
parameter determines the amount of noise that is added. A value of 0.01
adds a lot of noise (more noise == less impact becaue the model doesn't get it); a value of 1.0
removes most of noise so the generated image gets conditioned more.
Preparing the reference image
The reference image needs to be encoded by the CLIP vision model. The encoder resizes the image to 224×224 and crops it to the center!. It's not an IPAdapter thing, it's how the clip vision works. This means that if you use a portrait or landscape image and the main attention (eg: the face of a character) is not in the middle you'll likely get undesired results. Use square pictures as reference for more predictable results.
I've added a PrepImageForClipVision
node that does all the required operations for you. You just have to select the crop position (top/left/center/etc...) and a sharpening amount if you want.
In the image below you can see the difference between prepped and not prepped images.
KSampler configuration suggestions
The IPAdapter generally requires a few more steps
than usual, if the result is underwhelming try to add 10+ steps. The model tends to burn the images a little. If needed lower the CFG scale.
The noise
option generally grants better results, experiment with it.
IPAdapter + ControlNet
The model is very effective when paired with a ControlNet. In the example below I experimented with Canny. The workflow is in the examples directory.
IPAdapter Face
IPAdapter offers an interesting model for a kind of "face swap" effect. The workflow is provided. Set a close up face as reference image and then input your text prompt as always. The generated character should have the face of the reference. It also works with img2img given a high denoise.
Note: there's a new full-face
model available that's arguably better.
Masking (Inpainting)
The most effective way to apply the IPAdapter to a region is by an inpainting workflow. Remeber to use a specific checkpoint for inpainting otherwise it won't work. Even if you are inpainting a face I find that the IPAdapter-Plus (not the face one), works best.
Image Batches
It is possible to pass multiple images for the conditioning with the Batch Images
node. An example workflow is provided; in the picture below you can see the result of one and two images conditioning.
It seems to be effective with 2-3 images, beyond that it tends to blur the information too much.
Image Weighting
When sending multiple images you can increase/decrease the weight of each image by using the IPAdapterEncoder
node. The workflow (included in the examples) looks like this:
The node accepts 4 images, but remember that you can send batches of images to each slot.
Weight types
You can choose how the IPAdapter weight is applied to the image embeds. Options are:
- original: The weight is applied to the aggregated tensors. The weight works predictably for values greater and lower than 1.
- linear: The weight is applied to the individual tensors before aggretating them. Compared to
original
the influence is weaker when weight is <1 and stronger when >1. Note: at weight1
the two methods are equivalent. - channel penalty: This method is a modified version of Lvmin Zhang's (Fooocus). Results are sometimes sharper. It works very well also when weight is >1. Still experimental, may change in the future.
The image below shows the difference (zoom in).
In the examples directory you can find a workflow that lets you easily compare the three methods.
Note: I'm not still sure whether all methods will stay. Linear
seems the most sensible but I wanted to keep the original
for backward compatibility. channel penalty
has a weird non-commercial clause but it's still part of a GNU GPLv3 software (ie: there's a licensing clash) so I'm trying to understand how to deal with that.
Attention masking
It's possible to add a mask to define the area where the IPAdapter will be applied to. Everything outside the mask will ignore the reference images and will only listen to the text prompt.
It is suggested to use a mask of the same size of the final generated image.
In the picture below I use two reference images masked one on the left and the other on the right. The image is generated only with IPAdapter and one ksampler (without in/outpainting or area conditioning).
It is also possible to send a batch of masks that will be applied to a batch of latents, one per frame. The size should be the same but if needed some normalization will be performed to avoid errors. This feature also supports (experimentally) AnimateDiff including context sliding.
In the examples directory you'll find a couple of masking workflows: simple and two masks.
Timestepping
In the Apply IPAdapter
node you can set a start and an end point. The IPAdapter will be applied exclusively in that timeframe of the generation. This is a very powerful tool to modulate the intesity of IPAdapter models.
Troubleshooting
Error: 'CLIPVisionModelOutput' object has no attribute 'penultimate_hidden_states' and AttributeError: 'NoneType' object has no attribute 'encode_image'
You are using an old version of ComfyUI or of this extension. Update and you'll be fine. Please note that on Windows for a full update you might need to re-download the latest standalone version. Also sometimes the Manager fails to update even if everything seems fine. In that case you need to update manually or remove the extension and re-install it.
size mismatch for proj_in.weight: copying a param with shape torch.Size([..., ...]) from checkpoint, the shape in current model is torch.Size([..., ...])
You are using the wrong image encoder+IPAdapter Model+Checkpoint combo. Remember that you need to select the CLIP encoder v1.5 for all v1.5 IPAdapter models AND for all models ending with vit-h
(even if they are for SDXL).
Is it true that the input reference image must have the same size of the output image?
No, that's a metropolitan legend. Your input and output images can be of any size. Remember that all input images are scaled and cropped to 224x224 anyway.
Diffusers version
If you are interested I've also implemented the same features for Huggingface Diffusers.
Credits
IPAdapter in the wild
Let me know if you spot the IPAdapter in the wild!
- For German speakers you can find interesting YouTube tutorials on A Latent Place.
- Scott Detweiler covered this extension.