Code files for Laser Triangulation Measurement based on Xilinx XC6SLX16-CSG324 EVM board
File description:
Written in Verilog format.
Overall function: Drive the laser with current control based on SPI DAC & Drive the image sensor and catch image data captured by ADS807 & Transmit the image data to PC on UART for further analysis.
UART_TOP.v: top module file.
SYS_RST.v: to generate system reset signal and adc clock signal.
CMOS_DRIVE_LFL1402.v: to generate clock signals for linear image sensor LFL1402.
my_uart_rx.v: to receive signals from UART port, from PC.
UART_CLOCK.v: to generate UART RX&TX clock signals.
UART_PC.v: to transmit signals through UART port, to send image data to PC.
UART_APPLY.v: to address the asynchronous problem between ADC output speed and UART transmit speed.
SPI_Master_User.v: to generate SPI output signals to DAC to drive the laser.
UART.ucf: user pin constraint file.
Laser_Triangulation.xise: project file.
Update by Lu on 3.20.2017.